Hunter Fan 41545 operation manual Attaching Canopy to Fan Assembly

Page 12

®

3.Position the slots in the assem- bly washer over the threaded holes in the adapter as shown in Figure 4c.

Threaded

Adapter Hole

Assembly

Washer

Figure 4c - Positioning Assembly Washer Slots over Threaded Holes

4.Attach the canopy tightly to the fan assembly with three #8-32 assembly screws and lockwashers as shown in Figure 4d.

Assembly Screw

and Lockwasher

Figure 4d - Attaching Canopy to Fan Assembly

41545-01 6/10/2002

12

Image 12

Contents For Hunter Ceiling Fans 41545-01 6/10/2002 Congratulations Contents Important Information Do YOU Need HELP?Optional Accessories Getting ReadyGathering the Tools Preparing the FAN SiteINSTALLER’S Choice Flush MountingInstalling the Ceiling Plate Adding Isolators to Ceiling PlateAttaching Ceiling Plate to 2 x 4 Brace Assembling Housings Motor Hanger AdapterAssembling the FAN Standard and Angle MountingFlush Mounting Attaching Canopy to Fan Assembly Wiring the FAN Assembled Fan HangingBlack and the black/white Hanging the FAN Canopy Tabs and Grooves in Hanger BallAssembling FAN Blades Inserting Grommet intoAttaching Blade Irons to Hub of Fan Assembly Attaching the Switch Housing Attaching the Upper Switch HousingConnect the upper plug connec Installing Light Fixture Installing Accessory Light KitsOperating Your Hunter FAN Air Flow PatternsHunter fans have Power to cut your cooling Costs up to 40% Cleaning and Maintenance Manufacturers Phone NumberTroubleshooting ProblemSolution Probable CauseProblem Probable Cause