®
STEP 1 - GETTING READY
GATHERING THE TOOLS
You will need the following tools for installing the fan:
•Electric drill with 9/64" bit
•Standard screwdriver
•
•Wrench or pliers
OPTIONAL ACCESSORIES
Consider using Hunter’s optional ac- cessories, including a
For quiet and optimum performance of your Hunter fan, use only Hunter speed controls.
PREPARING THE FAN SITE
The location of a ceiling fan and how the fan is attached to the building structure are essential for reliable operation, maximum efficiency, and energy savings. For this reason, we have included a separate booklet — “Guide to Choosing and Preparing a Ceiling Fan Site” — to help you select the best location for your fan. The booklet also provides informa- tion to ensure your fan support and electric outlet box meet
The instructions in this installation manual assume that you have used “Guide to Choosing and Preparing a Ceiling Fan Site” to pick the fan location and make certain the proper fan support and outlet box are in- stalled.
CHECKING YOUR FAN PARTS
Carefully unpack your fan to avoid damage to the fan parts. Check for any shipping damage to the motor or fan blades. If one of the fan blades was damaged in shipment, return all the blades for replacement.
Hint: If you are installing more than one fan, keep the fan blades in sets, as they were shipped.
The fan includes a separate diagram of the screws and other small parts needed for the fan. Keep this dia- gram handy for identifying parts dur- ing installation; the diagram indicates the step in which each part is used.
If any parts are missing or damaged, contact your Hunter dealer or call Hunter Parts Department at
41545-01 6/10/2002
6