Hunter Fan 41545 operation manual Troubleshooting, Problem, Probable Cause, Solution

Page 24

®

TROUBLESHOOTING

PROBLEM

Nothing happens; fan does not move.

PROBABLE CAUSE

1.Power turned off, fuse blown, or circuit breaker tripped.

2.Loose wire connections or wrong connections.

3.Motor reversing switch not en- gaged.

4.Pull chain switch not “on.”

5.Shipping bumpers still in place.

SOLUTION

1.Turn power on, replace fuse, or re- set breaker.

2a. Loosen canopy, check all connections according to STEP 5 - WIRING THE FAN (turn power off before checking).

2b.Check the plug connection in the switch housing according to STEP 8-ATTACHING THE SWITCH HOUS- ING.

3.Push switch firmly up or down.

4.Pull switch chain.

5.Remove shipping bumpers.

Noisy operation.	1.	Blade brackets screwed loosely to	1.	Tighten screws until snug.
		motor.
	2.	Blade screwed loosely to blade iron.	2.	Tighten screws until snug.
	3.	Blade cracked.	3.	Replace all blades.

41545-01 6/10/2002

24

Image 24

Contents For Hunter Ceiling Fans 41545-01 6/10/2002 Congratulations Contents Important Information Do YOU Need HELP?Optional Accessories Getting ReadyGathering the Tools Preparing the FAN SiteINSTALLER’S Choice Flush MountingInstalling the Ceiling Plate Adding Isolators to Ceiling PlateAttaching Ceiling Plate to 2 x 4 Brace Assembling Housings Motor Hanger AdapterAssembling the FAN Standard and Angle MountingFlush Mounting Attaching Canopy to Fan Assembly Wiring the FAN Assembled Fan HangingBlack and the black/white Hanging the FAN Canopy Tabs and Grooves in Hanger BallAssembling FAN Blades Inserting Grommet intoAttaching Blade Irons to Hub of Fan Assembly Attaching the Switch Housing Attaching the Upper Switch HousingConnect the upper plug connec Installing Light Fixture Installing Accessory Light KitsOperating Your Hunter FAN Air Flow PatternsHunter fans have Power to cut your cooling Costs up to 40% Cleaning and Maintenance Manufacturers Phone NumberTroubleshooting ProblemSolution Probable CauseProblem Probable Cause