Home Automation 1503 owner manual Restoring Zones, Then enter your master code number

Page 16

Home Automation, Inc.

then enter your master code number.

The console will beep once, and the time, date and status display will return. The bottom line will now read “UPSTAIRS WINDOW BYPASSED” to remind you that the zone is bypassed.

RESTORING ZONES

Restoring a zone puts it back on active duty in the system. When restored, the BYPASSED indication will no longer be displayed on the status line and the zone will be checked for alarm and trouble con- ditions.

To restore a zone that has been bypassed, press any of the SECURITY keys, then the # key, the number of the zone to restore then ENTER, (or # to restore ALL zones), then your code number.

For example, to turn the security system off and restore zone 2, press SECURITY-OFF, #, 2, ENTER, then your code number.

The console will beep and the display will return to the time, date and status display. You can also scroll through the zones by pressing the SHOW key instead of the zone number.

To simply restore all of the zones, press # when the display reads “RESTORE ZONE:”

AUTO-BYPASS

In order to prevent the alarm from sounding unexpectedly if a window or door is open when the

system is armed, the Model 1503 will automatically bypass a zone if the zone is in the alarm state when the system is armed.

When this happens, the display will indicate that the zone was bypassed.

Note that there is an exit delay before the system is armed in any mode, so that the bypass will only take place if the zone is in alarm when the exit delay is over and the system actually arms itself.

When a zone is AUTO-BYPASSED, it will be automatically restored the next time you arm or disarm the system. The auto-bypass is recorded in the event log as “ZONE NAME BYPASSED”

To prevent any zone from being bypassed unintentionally, you should always look for SYSTEM OK on the display before arming and leav- ing the premises.

The AUTO-BYPASS feature can be disabled if you do not want the system to automatically bypass open zones. If the auto-bypass feature is disabled, the alarm will sound if an open zone is armed.

NOTE: The AUTO-BYPASS feature is disabled on UL Listed Installa- tions.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents HomeAutomation,Inc Alarm System CancelSECURITY-OFF, *, 2, ENTER, Code SECURITY-OFF, #, #, CodePage Contents Scrolling Through Names Show Programs Show ALL Programs Delete ProgramGoodbye Panic Button Over the Phone # # # # # # PC Access ALL OFF Status EventsSET-UP Model 1503 Default Settings Model Number Model 1503 VersionModel 1503 LC Serial NumberModel 1503 Version Model 1503-LC Differences Between Version 2 and LC ModelsDifferences in models are noted in this manual Things YOU should Know To silence the beeper, press the Cancel key For more information, seeSilencing Alarms That’s all there is to itTurning the Security System on Press the SECURITY-OFF keyExit Delay L E E PTo quick arm the system in the Away mode, press AWAY, Away Then enter your master code number Burglar Alarm Activated System now waits the Outside Siren Delay 60 seconds ALARM! Zone Name Tripped Emergency ALARM! Police EMG BTN TrippedMediately Please Respond ImmediatelySpond Immediately Fire Alarm Fire EMG BTN TrippedMedical EMG BTN Tripped Alarm Reset Alarm Cancel Page Master Code Auxiliary CodesUsed is recorded in the event log Duress CodeModel 1503-LC cannot use Model 1102 Expansion Enclosures Module Types Appliance Modules113 House Code X+2House Code X+3 Console will beep, and a ALL OFFMomentary ON/OFF Commands Temperature this is the air temperature read by the Pesm Freeze Alarm Temperature Control Appliances Model 1102 Expansion Enclosure Model1503Version2only Temperatures lo and hi tem- peratures All Lights On, All Off Program Storage Press the Prog keyPress the UNIT-NUMBER key Press 4 or the Show key 4 times, thenSince 600 PM is what we want, press Automatic Calculation of SUNRISE/ S U N S E TPress PROG, UNIT-NUMBER, 2, OFF Mmdd DAY Press 9 for weekends Press the Enter keyPress Prog key if you aren’t already in the Program menu If the display reads as above, pressSome other programming sugges- tions Press Cancel so that this program is not storedNow press *, Asleep Procedure for programming a button is Display will read GO to BED ALL OFF EnterDisplay will read Prog GO to BED Front Porch DIM Display will read RUN GO to BED Enter Cancel Press Show to see the second and third programs for ButtonPress Cancel twice to exit the Show Programs menu Display will read GO to BED Master AsleepAppendix shows which buttons are activated for each zone Example Program Button 2 to run at 600 PM every weekdayPress TIME, 6, 0, 0, PM Press DATE-DAY, DATE-DAY, 8, Enter Display should read When Away ALL OFF Display should show When Z6 ALM Stairwell on forAppendix shows which buttons are activated by which zones When Z1 ALM if DRK Unit 1 on Display ConditionalLIT DRKTime Clocks Light on178, Enter when away ALL OFF 178, Enter when away Unit 1 on Press PROG, *, 180, ENTER, UNIT-NUMBER, 1, ON, EnterPrograms for when security off DAYS, ENTER, Enter Show Programs Press the Show keyPress the Show key to see the next program in memory Press the SET-UP key to go back toShow Programs for ALL Unit Numbers Previous program in memoryPulse and Tone Phones Remote Phones Phone Access Denied Remote Lockout Goodbye Star * Cancel Repeat Message Model 1503 Version 2 onlyModel 1503 will say Home Control Enter Unit NUMBER, then Pound KEYOFF Temperature is 76 Degrees Main MenuUnit numbers 17 and 19 Control, then press the # keyModel 1503 will then confirm the new low setting ASLEEP, 3 AWAY, Star * CAN- CELExamples Model 1503 will say ButtonYou will then be returned to the main menu Enter your code numberFire Zone in ALARM, Trouble NOW or had Trouble Zone X Zone Type BypassedHad Trouble To hear the event log, press 7 from the main menuRecord MESSAGE, 8 Repeat Message Play ADDRESS, Star Cancel To Cancel from the message menu, pressGoodbye Panic Button Over the Phone # # #PC Access Fire Alarm Dial Order Freeze Alarm Dial OrderModel 1503 Voice DIAL-OUT Planner Dial OUT 1 onEmergency Numbers Fire Police Medical Other instructionsHome Phone Code againDigital Dialer To turn all lights off, press SET Time SET DateTo set up your CODES, press SET-UP, 1Codes Display will request yourRemember Your NEW Code Through 7 for SundayThere are 4 auxiliary codes Auxiliary Code ENTER. To remove a code, enter 0000 in its placePress Show to advance the display to Access the system from a lo- cal phoneMode OFF, press a 0 then press Enter Exit Delay Number HouseHouse Code Default setting for ENTRY/ Exit Chime is YES Default setting for Quick ARM Enabled is no Default setting for Answer Outside CALL? is YES Default setting for TELE- Phone Access is onTo exit the set-up facility, press Default for Remote Commands OK? is YES Factory default for Rings Before Answer isDefault dial type is Tone Dial TypePhone numbers can be up to 16 digits Dial OUT 1 on Dial OUT 1 OFFDial OUT Number Dial OUT 2 on Dial OUT 2 OFF Dial OUT Number Dial OUT 3 on Dial OUT 3 OFFSame as Dial OUT Number Dial OUT Number Dial OUT 4 on Dial OUT 4 OFFInstaller Name Number Do not return to a burning houseFederal Communications COMMIS- Sion Notice Canadian Department of COMMUNI- Cations Notice

1503 specifications

Home Automation 1503 is a state-of-the-art system designed to elevate the standards of modern living by integrating advanced technology into everyday activities within the home. This comprehensive solution seamlessly connects various household devices, allowing users to control them through a central interface, typically accessible via smartphones, tablets, or dedicated control panels.

One of the hallmark features of Home Automation 1503 is its interoperability. The system is compatible with a wide array of devices, ranging from lighting and HVAC systems to security cameras and smart appliances. This ensures that homeowners can create a cohesive and interconnected environment tailored to their specific needs.

The technologies underpinning Home Automation 1503 include wireless communication protocols such as Wi-Fi, Zigbee, and Z-Wave. These protocols facilitate reliable communication between devices, ensuring that commands are transmitted quickly and accurately. Additionally, the system employs AI and machine learning algorithms to create smart environments that adapt to user preferences, enhancing convenience and energy efficiency.

Another significant characteristic of Home Automation 1503 is its user-friendly interface. The system often features customizable dashboards, enabling users to monitor and manage their home from a single screen. Voice control capabilities, integrated with popular virtual assistants such as Amazon Alexa or Google Assistant, allow for hands-free operation, making everyday tasks even more convenient.

Security is a top priority in Home Automation 1503. The system supports advanced security features like smart locks, motion sensors, and video surveillance, all of which can be monitored remotely. Users receive real-time alerts on their devices, ensuring they are informed of any unusual activities around their homes.

Moreover, the energy management aspect of Home Automation 1503 cannot be overlooked. The system promotes energy-saving practices by allowing users to schedule lighting, heating, and appliance operation, reducing overall consumption and contributing to a more sustainable lifestyle.

In conclusion, Home Automation 1503 represents a significant advancement in home technology, enhancing security, convenience, and energy efficiency. With its diverse range of features, compatibility with various devices, and user-focused design, it offers a glimpse into the future of smart living, making homes not just places to live, but intelligent ecosystems that cater to the comfort and safety of their inhabitants.
Top Page Image Contents