Home Automation 1503 owner manual Display will read GO to BED Master Asleep

Page 42

Home Automation, Inc.

The display will read “GO TO BED: MASTER ASLEEP”

Press the ENTER key.

The console will beep once and the program will be entered into memory. Button 3 is now programmed for the GO TO BED example.

TO SEE YOUR BUTTON PROGRAMS

To see the programs for BUTTON 3, press CANCEL to get back to the time, date and status display. Now press SHOW, PROG, *, 3, ENTER.

The first program for BUTTON 3 will appear on the display.

Press SHOW to see the second and third programs for BUTTON 3.

If there are no more programs in memory for BUTTON 1, then the dis- play will show “NO MORE PROGRAMS” and return to the last program. The console will beep three times. You can press SET-UP to go back through the programs for BUTTON 3. See SHOW PROGRAMS for more informa- tion.

Press CANCEL twice to exit the SHOW PROGRAMS menu.

You can enter more programs for BUTTON 3 or any other button when- ever you wish using PROG, *.

To brighten or dim lights, or to program other security modes on buttons, or to bypass or restore zones, simply substitute those commands for the ones shown in the example.

TO RUN BUTTON PROGRAMS

Any time you want to activate the programs entered for a button, press the button number, then ENTER from the time, date and status display.

To run the BUTTON 3 programs in the example above, first look at the display to see that it is displaying time, date and status. (If not, press cancel until it does.)

Press the 3 key on the keypad, then SHOW.

The display will read “RUN GO TO BED - ENTER CANCEL”

Press ENTER.

The programs will be run. The console will beep once and display the number of programs found for BUTTON NUMBER 3, then return to the time, date and status display.

You may omit pressing the SHOW button if you wish.

If you do not wish to run the button programs, press CANCEL in- stead of ENTER.

If no programs are found for the button, the console will beep three times and read “ 0 PROGRAMS RUN”, then return to the time, date and status display.

TIMED PROGRAMMING OF BUTTONS

NOTE: In UL Listed Installa- tions, Timed Programming of Button functions which control the secu- rity system (i.e. arming and dis- arming) shall not be used.

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents HomeAutomation,Inc SECURITY-OFF, *, 2, ENTER, Code Alarm SystemCancel SECURITY-OFF, #, #, CodePage Contents Scrolling Through Names Show Programs Show ALL Programs Delete ProgramGoodbye Panic Button Over the Phone # # # # # # PC Access ALL OFF Status EventsSET-UP Model 1503 Default Settings Model 1503 LC Model NumberModel 1503 Version Serial NumberDifferences Between Version 2 and LC Models Model 1503 Version Model 1503-LCDifferences in models are noted in this manual Things YOU should Know To silence the beeper, press the Cancel key For more information, seeTurning the Security System on Silencing AlarmsThat’s all there is to it Press the SECURITY-OFF keyExit Delay L E E PTo quick arm the system in the Away mode, press AWAY, Away Then enter your master code number Burglar Alarm Activated System now waits the Outside Siren Delay 60 seconds Mediately ALARM! Zone Name TrippedEmergency ALARM! Police EMG BTN Tripped Please Respond ImmediatelyFire Alarm Fire EMG BTN Tripped Spond ImmediatelyMedical EMG BTN Tripped Alarm Reset Alarm Cancel Page Used is recorded in the event log Master CodeAuxiliary Codes Duress CodeModel 1503-LC cannot use Model 1102 Expansion Enclosures Module Types Appliance ModulesHouse Code X+2 113House Code X+3 Console will beep, and a ALL OFFMomentary ON/OFF Commands Temperature this is the air temperature read by the Pesm Freeze Alarm Temperature Control Appliances Model 1102 Expansion Enclosure Model1503Version2only Temperatures lo and hi tem- peratures All Lights On, All Off Press the UNIT-NUMBER key Program StoragePress the Prog key Press 4 or the Show key 4 times, thenAutomatic Calculation of SUNRISE/ S U N S E T Since 600 PM is what we want, pressPress PROG, UNIT-NUMBER, 2, OFF Mmdd DAY Press Prog key if you aren’t already in the Program menu Press 9 for weekendsPress the Enter key If the display reads as above, pressPress Cancel so that this program is not stored Some other programming sugges- tionsNow press *, Asleep Procedure for programming a button is Enter Display will read GO to BED ALL OFFDisplay will read Prog GO to BED Front Porch DIM Press Cancel twice to exit the Show Programs menu Display will read RUN GO to BED Enter CancelPress Show to see the second and third programs for Button Display will read GO to BED Master AsleepExample Program Button 2 to run at 600 PM every weekday Appendix shows which buttons are activated for each zonePress TIME, 6, 0, 0, PM Press DATE-DAY, DATE-DAY, 8, Enter Display should show When Z6 ALM Stairwell on for Display should read When Away ALL OFFAppendix shows which buttons are activated by which zones LIT When Z1 ALM if DRK Unit 1 onDisplay Conditional DRKTime Clocks Light on178, Enter when away ALL OFF 178, Enter when away Unit 1 on Press PROG, *, 180, ENTER, UNIT-NUMBER, 1, ON, EnterPrograms for when security off DAYS, ENTER, Enter Press the Show key to see the next program in memory Show ProgramsPress the Show key Press the SET-UP key to go back toShow Programs for ALL Unit Numbers Previous program in memoryPulse and Tone Phones Remote Phones Phone Access Denied Remote Lockout Model 1503 will say Home Goodbye Star * Cancel RepeatMessage Model 1503 Version 2 only Control Enter Unit NUMBER, then Pound KEYUnit numbers 17 and 19 OFF Temperature is 76 DegreesMain Menu Control, then press the # keyModel 1503 will then confirm the new low setting ASLEEP, 3 AWAY, Star * CAN- CELYou will then be returned to the main menu ExamplesModel 1503 will say Button Enter your code numberHad Trouble Fire Zone in ALARM, Trouble NOW or had TroubleZone X Zone Type Bypassed To hear the event log, press 7 from the main menuGoodbye Record MESSAGE, 8 Repeat Message Play ADDRESS, Star CancelTo Cancel from the message menu, press Panic Button Over the Phone # # #PC Access Model 1503 Voice DIAL-OUT Planner Fire Alarm Dial OrderFreeze Alarm Dial Order Dial OUT 1 onHome Phone Emergency Numbers Fire Police MedicalOther instructions Code againDigital Dialer To turn all lights off, press SET Time SET DateRemember Your NEW Code To set up your CODES, press SET-UP, 1CodesDisplay will request your Through 7 for SundayThere are 4 auxiliary codes Auxiliary Code ENTER. To remove a code, enter 0000 in its placeAccess the system from a lo- cal phone Press Show to advance the display toMode OFF, press a 0 then press Enter Exit Delay House NumberHouse Code Default setting for ENTRY/ Exit Chime is YES Default setting for Quick ARM Enabled is no Default setting for TELE- Phone Access is on Default setting for Answer Outside CALL? is YESTo exit the set-up facility, press Default dial type is Tone Default for Remote Commands OK? is YESFactory default for Rings Before Answer is Dial TypePhone numbers can be up to 16 digits Dial OUT 1 on Dial OUT 1 OFFSame as Dial OUT Number Dial OUT Number Dial OUT 2 on Dial OUT 2 OFFDial OUT Number Dial OUT 3 on Dial OUT 3 OFF Dial OUT Number Dial OUT 4 on Dial OUT 4 OFFInstaller Name Number Do not return to a burning houseFederal Communications COMMIS- Sion Notice Canadian Department of COMMUNI- Cations Notice

1503 specifications

Home Automation 1503 is a state-of-the-art system designed to elevate the standards of modern living by integrating advanced technology into everyday activities within the home. This comprehensive solution seamlessly connects various household devices, allowing users to control them through a central interface, typically accessible via smartphones, tablets, or dedicated control panels.

One of the hallmark features of Home Automation 1503 is its interoperability. The system is compatible with a wide array of devices, ranging from lighting and HVAC systems to security cameras and smart appliances. This ensures that homeowners can create a cohesive and interconnected environment tailored to their specific needs.

The technologies underpinning Home Automation 1503 include wireless communication protocols such as Wi-Fi, Zigbee, and Z-Wave. These protocols facilitate reliable communication between devices, ensuring that commands are transmitted quickly and accurately. Additionally, the system employs AI and machine learning algorithms to create smart environments that adapt to user preferences, enhancing convenience and energy efficiency.

Another significant characteristic of Home Automation 1503 is its user-friendly interface. The system often features customizable dashboards, enabling users to monitor and manage their home from a single screen. Voice control capabilities, integrated with popular virtual assistants such as Amazon Alexa or Google Assistant, allow for hands-free operation, making everyday tasks even more convenient.

Security is a top priority in Home Automation 1503. The system supports advanced security features like smart locks, motion sensors, and video surveillance, all of which can be monitored remotely. Users receive real-time alerts on their devices, ensuring they are informed of any unusual activities around their homes.

Moreover, the energy management aspect of Home Automation 1503 cannot be overlooked. The system promotes energy-saving practices by allowing users to schedule lighting, heating, and appliance operation, reducing overall consumption and contributing to a more sustainable lifestyle.

In conclusion, Home Automation 1503 represents a significant advancement in home technology, enhancing security, convenience, and energy efficiency. With its diverse range of features, compatibility with various devices, and user-focused design, it offers a glimpse into the future of smart living, making homes not just places to live, but intelligent ecosystems that cater to the comfort and safety of their inhabitants.
Top Page Image Contents