Home Automation owner manual Model 1503 will then confirm the new low setting

Page 57

LO TEMPERATURE IS 65 DEGREES. HI TEMPERATURE IS 85 DEGREES. COM- MANDS ARE: 0: OFF, 1: ON, 2: OFF FOR TIME, 3: ON FOR TIME, 4 LO, 5 HI, STAR (*) CANCEL.”

This message means that the en- ergy saver is on or off, that the air temperature at the PESM is 76 degrees Fahrenheit, that the set- ting for the LO temperature is 65 degrees F, and that the setting for the HI temperature is 85 degrees F. You may turn the energy saver on or off, on for time, off for time, or change the low or high settings.

If a unit number has been set up as a PESM, then (4) LO refers to the low temperature setting and (5) HI refers to the high temperature setting.

To change the LO setting, press 4.

The Model 1503 will say “ENTER LO TEMPERATURE, THEN POUND KEY.”

Enter the new low temperature, then press the pound key.

The Model 1503 will then confirm the new low setting.

Press star (*) to go back to the main menu.

Remember that the LO and HI tem- perature settings are the tempera- tures that will be maintained by your Model 1503 when the Program- mable Energy Saver Module is on. When the PESM is off, your thermo- stat will control the temperature.

If the unit number is not set up as a PESM, then 4 (LO) and 5 (HI) do not do anything.

Model 1503 Owner's Manual

2 - SECURITY

Press 2 from the main menu to get to the Security menu.

The Model 1503 will say: “SECU- RITY COMMANDS ARE: 0: OFF, 1: HOME,

2:ASLEEP, 3: AWAY, STAR (*): CAN- CEL”.

Press 0 for SECURITY OFF, 1 for HOME, 2 for ASLEEP or 3 for AWAY.

If you press 0, the Model 1503 will say: “OFF. ENTER CODE NUMBER, STAR: BYPASS, POUND KEY: RESTORE”

At this point, you can enter your code number to put the secu- rity system in the whichever mode you selected, OR you can bypass and restore zones.

To cancel, press * twice.

To put the security system in the mode you selected, enter your code number on the telephone key- pad. When correctly entered, the Model 1503 will say “SECURITY MODE IS (whatever you set it to.)

To bypass a zone, press the * key instead of entering your code number. The

Model 1503 will say “ENTER ZONE NUMBER TO BYPASS, THEN POUND KEY. STAR: CANCEL”.

Press the zone number that you want to bypass, then press the # key.

The Model 1503 will repeat the number of the zone you are bypass- ing, then say “CODE NUMBER:”.

55

Image 57
Contents HomeAutomation,Inc Cancel Alarm SystemSECURITY-OFF, *, 2, ENTER, Code SECURITY-OFF, #, #, CodePage Contents Show Programs Show ALL Programs Delete Program Scrolling Through NamesALL OFF Status Events Goodbye Panic Button Over the Phone # # # # # # PC AccessSET-UP Model 1503 Default Settings Model 1503 Version Model NumberModel 1503 LC Serial NumberDifferences Between Version 2 and LC Models Model 1503 Version Model 1503-LCDifferences in models are noted in this manual Things YOU should Know For more information, see To silence the beeper, press the Cancel keyThat’s all there is to it Silencing AlarmsTurning the Security System on Press the SECURITY-OFF keyL E E P Exit DelayTo quick arm the system in the Away mode, press AWAY, Away Then enter your master code number Burglar Alarm Activated System now waits the Outside Siren Delay 60 seconds Emergency ALARM! Police EMG BTN Tripped ALARM! Zone Name TrippedMediately Please Respond ImmediatelyFire Alarm Fire EMG BTN Tripped Spond ImmediatelyMedical EMG BTN Tripped Alarm Reset Alarm Cancel Page Auxiliary Codes Master CodeUsed is recorded in the event log Duress CodeModel 1503-LC cannot use Model 1102 Expansion Enclosures Appliance Modules Module TypesHouse Code X+2 113House Code X+3 ALL OFF Console will beep, and aMomentary ON/OFF Commands Temperature this is the air temperature read by the Pesm Freeze Alarm Temperature Control Appliances Model 1102 Expansion Enclosure Model1503Version2only Temperatures lo and hi tem- peratures All Lights On, All Off Press the Prog key Program StoragePress the UNIT-NUMBER key Press 4 or the Show key 4 times, thenAutomatic Calculation of SUNRISE/ S U N S E T Since 600 PM is what we want, pressPress PROG, UNIT-NUMBER, 2, OFF Mmdd DAY Press the Enter key Press 9 for weekendsPress Prog key if you aren’t already in the Program menu If the display reads as above, pressPress Cancel so that this program is not stored Some other programming sugges- tionsNow press *, Asleep Procedure for programming a button is Enter Display will read GO to BED ALL OFFDisplay will read Prog GO to BED Front Porch DIM Press Show to see the second and third programs for Button Display will read RUN GO to BED Enter CancelPress Cancel twice to exit the Show Programs menu Display will read GO to BED Master AsleepExample Program Button 2 to run at 600 PM every weekday Appendix shows which buttons are activated for each zonePress TIME, 6, 0, 0, PM Press DATE-DAY, DATE-DAY, 8, Enter Display should show When Z6 ALM Stairwell on for Display should read When Away ALL OFFAppendix shows which buttons are activated by which zones Display Conditional When Z1 ALM if DRK Unit 1 onLIT DRKLight on Time ClocksPress PROG, *, 180, ENTER, UNIT-NUMBER, 1, ON, Enter 178, Enter when away ALL OFF 178, Enter when away Unit 1 onPrograms for when security off DAYS, ENTER, Enter Press the Show key Show ProgramsPress the Show key to see the next program in memory Press the SET-UP key to go back toPrevious program in memory Show Programs for ALL Unit NumbersPulse and Tone Phones Remote Phones Phone Access Denied Remote Lockout Message Model 1503 Version 2 only Goodbye Star * Cancel RepeatModel 1503 will say Home Control Enter Unit NUMBER, then Pound KEYMain Menu OFF Temperature is 76 DegreesUnit numbers 17 and 19 Control, then press the # keyASLEEP, 3 AWAY, Star * CAN- CEL Model 1503 will then confirm the new low settingModel 1503 will say Button ExamplesYou will then be returned to the main menu Enter your code numberZone X Zone Type Bypassed Fire Zone in ALARM, Trouble NOW or had TroubleHad Trouble To hear the event log, press 7 from the main menuTo Cancel from the message menu, press Record MESSAGE, 8 Repeat Message Play ADDRESS, Star CancelGoodbye Panic Button Over the Phone # # #PC Access Freeze Alarm Dial Order Fire Alarm Dial OrderModel 1503 Voice DIAL-OUT Planner Dial OUT 1 onOther instructions Emergency Numbers Fire Police MedicalHome Phone Code againDigital Dialer To turn all lights off, press SET Date SET TimeDisplay will request your To set up your CODES, press SET-UP, 1CodesRemember Your NEW Code Through 7 for SundayThere are 4 auxiliary codes ENTER. To remove a code, enter 0000 in its place Auxiliary CodeAccess the system from a lo- cal phone Press Show to advance the display toMode OFF, press a 0 then press Enter Exit Delay House NumberHouse Code Default setting for ENTRY/ Exit Chime is YES Default setting for Quick ARM Enabled is no Default setting for TELE- Phone Access is on Default setting for Answer Outside CALL? is YESTo exit the set-up facility, press Factory default for Rings Before Answer is Default for Remote Commands OK? is YESDefault dial type is Tone Dial TypeDial OUT 1 on Dial OUT 1 OFF Phone numbers can be up to 16 digitsDial OUT Number Dial OUT 3 on Dial OUT 3 OFF Dial OUT Number Dial OUT 2 on Dial OUT 2 OFFSame as Dial OUT Number Dial OUT Number Dial OUT 4 on Dial OUT 4 OFFDo not return to a burning house Installer Name NumberCanadian Department of COMMUNI- Cations Notice Federal Communications COMMIS- Sion Notice

1503 specifications

Home Automation 1503 is a state-of-the-art system designed to elevate the standards of modern living by integrating advanced technology into everyday activities within the home. This comprehensive solution seamlessly connects various household devices, allowing users to control them through a central interface, typically accessible via smartphones, tablets, or dedicated control panels.

One of the hallmark features of Home Automation 1503 is its interoperability. The system is compatible with a wide array of devices, ranging from lighting and HVAC systems to security cameras and smart appliances. This ensures that homeowners can create a cohesive and interconnected environment tailored to their specific needs.

The technologies underpinning Home Automation 1503 include wireless communication protocols such as Wi-Fi, Zigbee, and Z-Wave. These protocols facilitate reliable communication between devices, ensuring that commands are transmitted quickly and accurately. Additionally, the system employs AI and machine learning algorithms to create smart environments that adapt to user preferences, enhancing convenience and energy efficiency.

Another significant characteristic of Home Automation 1503 is its user-friendly interface. The system often features customizable dashboards, enabling users to monitor and manage their home from a single screen. Voice control capabilities, integrated with popular virtual assistants such as Amazon Alexa or Google Assistant, allow for hands-free operation, making everyday tasks even more convenient.

Security is a top priority in Home Automation 1503. The system supports advanced security features like smart locks, motion sensors, and video surveillance, all of which can be monitored remotely. Users receive real-time alerts on their devices, ensuring they are informed of any unusual activities around their homes.

Moreover, the energy management aspect of Home Automation 1503 cannot be overlooked. The system promotes energy-saving practices by allowing users to schedule lighting, heating, and appliance operation, reducing overall consumption and contributing to a more sustainable lifestyle.

In conclusion, Home Automation 1503 represents a significant advancement in home technology, enhancing security, convenience, and energy efficiency. With its diverse range of features, compatibility with various devices, and user-focused design, it offers a glimpse into the future of smart living, making homes not just places to live, but intelligent ecosystems that cater to the comfort and safety of their inhabitants.