Home Automation 1503 Record MESSAGE, 8 Repeat Message Play ADDRESS, Star Cancel, Goodbye

Page 60

Home Automation,

8 - MESSAGE (MODEL 1503 Version 2 ONLY)

You can hear or leave an 8 sec- ond message on your Model 1503. You can also hear and record the street address that the Model 1503 uses when it dials out in an emergency.

To hear the message, press 8 from the main menu. The Model 1503 will say “MESSAGE IS” and then play the message.

After the message the Model 1503 will say “MESSAGE COMMANDS ARE: 1:

RECORD MESSAGE, 8: REPEAT MESSAGE,

3: PLAY ADDRESS, STAR: CANCEL.”

To record a message, press 1. The Model 1503 will say “RECORD MESSAGE:” and beep once. Say your message. After 8 seconds, you will hear another beep, and the Model 1503 will say “MESSAGE IS:” and repeat your message, then repeat the message menu.

Note: when you record a new mes- sage, the old one is erased.

To play back your address, press 3 from the MESSAGE menu. The Model 1503 will say “ADDRESS IS” and play the 8 second address.

To record your address, see SET UP

ADDRESS.

To CANCEL from the message menu, press *.

The message facility can be used as a handy “electronic notepad” for family members, since it can be used from any phone in the house. Just pick up the phone and press # 8, listen to the old message, then press 1 to leave a new message.

Note: When the Model 1503 is playing the message or the address, it does not listen for Touch Tones.

The console display will say “Check Message” when a new message is recorded. If the security system is disarmed, the console will beep once per second to indicate that there is a new message. The beep- ing can be silenced by pressing CANCEL on the console or by listen- ing to the message over the phone.

9 - GOODBYE

To make the Model 1503 hang up immediately, press 9 from the main menu. It will say “GOODBYE” and hang up.

From an in-house phone, the dial tone will return. From a remote phone, you will hear a click as the Model 1503 hangs up.

It is recommended that you press 9 to terminate a remote call. If you don’t, the Model 1503 will hang up anyway after about 15 seconds.

PANIC BUTTON OVER THE PHONE - # # #

# # #

On an in house phone only, you can activate the POLICE EMERGENCY BUTTON by picking up the phone and pressing the # key 6 times. This activates the interior sounder, the outside siren and turns on the ON FOR ALARM lights immediately.

The first # that you press logs you in, as usual, then the next 5 presses of the # key activate the alarm. If you are already logged

58

Page 59 Page 61
Image 60
Page 59 Page 61
Contents HomeAutomation,Inc Alarm System CancelSECURITY-OFF, *, 2, ENTER, Code SECURITY-OFF, #, #, CodePage Contents Scrolling Through Names Show Programs Show ALL Programs Delete ProgramGoodbye Panic Button Over the Phone # # # # # # PC Access ALL OFF Status EventsSET-UP Model 1503 Default Settings Model Number Model 1503 VersionModel 1503 LC Serial NumberDifferences Between Version 2 and LC Models Model 1503 Version Model 1503-LCDifferences in models are noted in this manual Things YOU should Know To silence the beeper, press the Cancel key For more information, seeSilencing Alarms That’s all there is to itTurning the Security System on Press the SECURITY-OFF keyExit Delay L E E PTo quick arm the system in the Away mode, press AWAY, Away Then enter your master code number Burglar Alarm Activated System now waits the Outside Siren Delay 60 seconds ALARM! Zone Name Tripped Emergency ALARM! Police EMG BTN TrippedMediately Please Respond ImmediatelyFire Alarm Fire EMG BTN Tripped Spond ImmediatelyMedical EMG BTN Tripped Alarm Reset Alarm Cancel Page Master Code Auxiliary CodesUsed is recorded in the event log Duress CodeModel 1503-LC cannot use Model 1102 Expansion Enclosures Module Types Appliance ModulesHouse Code X+2 113House Code X+3 Console will beep, and a ALL OFFMomentary ON/OFF Commands Temperature this is the air temperature read by the Pesm Freeze Alarm Temperature Control Appliances Model 1102 Expansion Enclosure Model1503Version2only Temperatures lo and hi tem- peratures All Lights On, All Off Program Storage Press the Prog keyPress the UNIT-NUMBER key Press 4 or the Show key 4 times, thenAutomatic Calculation of SUNRISE/ S U N S E T Since 600 PM is what we want, pressPress PROG, UNIT-NUMBER, 2, OFF Mmdd DAY Press 9 for weekends Press the Enter keyPress Prog key if you aren’t already in the Program menu If the display reads as above, pressPress Cancel so that this program is not stored Some other programming sugges- tionsNow press *, Asleep Procedure for programming a button is Enter Display will read GO to BED ALL OFFDisplay will read Prog GO to BED Front Porch DIM Display will read RUN GO to BED Enter Cancel Press Show to see the second and third programs for ButtonPress Cancel twice to exit the Show Programs menu Display will read GO to BED Master AsleepExample Program Button 2 to run at 600 PM every weekday Appendix shows which buttons are activated for each zonePress TIME, 6, 0, 0, PM Press DATE-DAY, DATE-DAY, 8, Enter Display should show When Z6 ALM Stairwell on for Display should read When Away ALL OFFAppendix shows which buttons are activated by which zones When Z1 ALM if DRK Unit 1 on Display ConditionalLIT DRKTime Clocks Light on178, Enter when away ALL OFF 178, Enter when away Unit 1 on Press PROG, *, 180, ENTER, UNIT-NUMBER, 1, ON, EnterPrograms for when security off DAYS, ENTER, Enter Show Programs Press the Show keyPress the Show key to see the next program in memory Press the SET-UP key to go back toShow Programs for ALL Unit Numbers Previous program in memoryPulse and Tone Phones Remote Phones Phone Access Denied Remote Lockout Goodbye Star * Cancel Repeat Message Model 1503 Version 2 onlyModel 1503 will say Home Control Enter Unit NUMBER, then Pound KEYOFF Temperature is 76 Degrees Main MenuUnit numbers 17 and 19 Control, then press the # keyModel 1503 will then confirm the new low setting ASLEEP, 3 AWAY, Star * CAN- CELExamples Model 1503 will say ButtonYou will then be returned to the main menu Enter your code numberFire Zone in ALARM, Trouble NOW or had Trouble Zone X Zone Type BypassedHad Trouble To hear the event log, press 7 from the main menuRecord MESSAGE, 8 Repeat Message Play ADDRESS, Star Cancel To Cancel from the message menu, pressGoodbye Panic Button Over the Phone # # #PC Access Fire Alarm Dial Order Freeze Alarm Dial OrderModel 1503 Voice DIAL-OUT Planner Dial OUT 1 onEmergency Numbers Fire Police Medical Other instructionsHome Phone Code againDigital Dialer To turn all lights off, press SET Time SET DateTo set up your CODES, press SET-UP, 1Codes Display will request yourRemember Your NEW Code Through 7 for SundayThere are 4 auxiliary codes Auxiliary Code ENTER. To remove a code, enter 0000 in its placeAccess the system from a lo- cal phone Press Show to advance the display toMode OFF, press a 0 then press Enter Exit Delay House NumberHouse Code Default setting for ENTRY/ Exit Chime is YES Default setting for Quick ARM Enabled is no Default setting for TELE- Phone Access is on Default setting for Answer Outside CALL? is YESTo exit the set-up facility, press Default for Remote Commands OK? is YES Factory default for Rings Before Answer isDefault dial type is Tone Dial TypePhone numbers can be up to 16 digits Dial OUT 1 on Dial OUT 1 OFFDial OUT Number Dial OUT 2 on Dial OUT 2 OFF Dial OUT Number Dial OUT 3 on Dial OUT 3 OFFSame as Dial OUT Number Dial OUT Number Dial OUT 4 on Dial OUT 4 OFFInstaller Name Number Do not return to a burning houseFederal Communications COMMIS- Sion Notice Canadian Department of COMMUNI- Cations Notice

1503 specifications

Home Automation 1503 is a state-of-the-art system designed to elevate the standards of modern living by integrating advanced technology into everyday activities within the home. This comprehensive solution seamlessly connects various household devices, allowing users to control them through a central interface, typically accessible via smartphones, tablets, or dedicated control panels.

One of the hallmark features of Home Automation 1503 is its interoperability. The system is compatible with a wide array of devices, ranging from lighting and HVAC systems to security cameras and smart appliances. This ensures that homeowners can create a cohesive and interconnected environment tailored to their specific needs.

The technologies underpinning Home Automation 1503 include wireless communication protocols such as Wi-Fi, Zigbee, and Z-Wave. These protocols facilitate reliable communication between devices, ensuring that commands are transmitted quickly and accurately. Additionally, the system employs AI and machine learning algorithms to create smart environments that adapt to user preferences, enhancing convenience and energy efficiency.

Another significant characteristic of Home Automation 1503 is its user-friendly interface. The system often features customizable dashboards, enabling users to monitor and manage their home from a single screen. Voice control capabilities, integrated with popular virtual assistants such as Amazon Alexa or Google Assistant, allow for hands-free operation, making everyday tasks even more convenient.

Security is a top priority in Home Automation 1503. The system supports advanced security features like smart locks, motion sensors, and video surveillance, all of which can be monitored remotely. Users receive real-time alerts on their devices, ensuring they are informed of any unusual activities around their homes.

Moreover, the energy management aspect of Home Automation 1503 cannot be overlooked. The system promotes energy-saving practices by allowing users to schedule lighting, heating, and appliance operation, reducing overall consumption and contributing to a more sustainable lifestyle.

In conclusion, Home Automation 1503 represents a significant advancement in home technology, enhancing security, convenience, and energy efficiency. With its diverse range of features, compatibility with various devices, and user-focused design, it offers a glimpse into the future of smart living, making homes not just places to live, but intelligent ecosystems that cater to the comfort and safety of their inhabitants.
Top Page Image Contents