Home Automation 1503 Fire Zone in ALARM, Trouble NOW or had Trouble, Zone X Zone Type Bypassed

Page 59

The Model 1503 will beep once and return you to the main menu.

6 - STATUS

To hear a complete status review, press 6 from the main menu.

You will hear a status report, just as if you were looking at the console display. The status report will say: SECURITY MODE IS (OFF, HOME, ASLEEP or AWAY)

If the alarm system has not been activated, the Model 1503 will say:

SYSTEM OK (meaning all zones secure, no troubles, no zones bypassed)

OR

-ZONE X (ZONE TYPE) (IN ALARM, TROUBLE NOW or HAD TROUBLE)

-FIRE ZONE (IN ALARM, TROUBLE NOW or HAD TROUBLE)

-ZONE X (ZONE TYPE) BYPASSED

-BATTERY LOW (TROUBLE NOW or HAD TROUBLE)

-PHONE LINE DEAD (TROUBLE NOW or

HAD TROUBLE)

-FUSE (TROUBLE NOW or HAD TROUBLE)

-AC POWER OFF (TROUBLE NOW or HAD TROUBLE)

If an outdoor temperature sensor is installed, the Model 1503 will say “OUTDOOR TEMPERATURE IS XX DEGREES.” The time and date will be spoken .

IF THE ALARM HAS BEEN ACTIVATED, the Model 1503 will say:

Model 1503 Owner's Manual

(EMERGENCY, FIRE or BURGLAR) ALARM ACTIVATED

OR

(EMERGENCY, FIRE or BURGLAR) ALARM RESET

AND one or more of the follow- ing:

-ZONE X (ZONE TYPE) TRIPPED

-FIRE ZONE TRIPPED

-FIRE EMERGENCY BUTTON TRIPPED

-POLICE EMERGENCY BUTTON TRIPPED

-MEDICAL EMERGENCY BUTTON TRIPPED

-FREEZE ALARM TRIPPED

If the Model 1503 says ALARM RESET instead of ALARM ACTIVATED, then you know that the outside siren has been automatically si- lenced.

7 - EVENTS

To hear the event log, press 7 from the main menu.

The Model 1503 will start at event 1, the most recent event, and read 3 events from the event log, along with the time and date of their occurrence. The Model 1503 will then say “STATUS COMMANDS ARE: 7: EVENTS, STAR: CANCEL”

To hear the next 3 events, press 7. To stop and return to the main menu, press *.

Note: When the Model 1503 reads the event log over the phone, you do not get the type of code used (master, aux, program or key) to arm and disarm the system.

57

Page 58 Page 60
Image 59
Page 58 Page 60
Contents HomeAutomation,Inc SECURITY-OFF, #, #, Code Alarm SystemCancel SECURITY-OFF, *, 2, ENTER, CodePage Contents Show Programs Show ALL Programs Delete Program Scrolling Through NamesALL OFF Status Events Goodbye Panic Button Over the Phone # # # # # # PC AccessSET-UP Model 1503 Default Settings Serial Number Model NumberModel 1503 Version Model 1503 LCDifferences in models are noted in this manual Differences Between Version 2 and LC ModelsModel 1503 Version Model 1503-LC Things YOU should Know For more information, see To silence the beeper, press the Cancel keyPress the SECURITY-OFF key Silencing AlarmsThat’s all there is to it Turning the Security System onL E E P Exit DelayTo quick arm the system in the Away mode, press AWAY, Away Then enter your master code number Burglar Alarm Activated System now waits the Outside Siren Delay 60 seconds Please Respond Immediately ALARM! Zone Name TrippedEmergency ALARM! Police EMG BTN Tripped MediatelyMedical EMG BTN Tripped Fire Alarm Fire EMG BTN TrippedSpond Immediately Alarm Reset Alarm Cancel Page Duress Code Master CodeAuxiliary Codes Used is recorded in the event logModel 1503-LC cannot use Model 1102 Expansion Enclosures Appliance Modules Module TypesHouse Code X+3 House Code X+2113 ALL OFF Console will beep, and aMomentary ON/OFF Commands Temperature this is the air temperature read by the Pesm Freeze Alarm Temperature Control Appliances Model 1102 Expansion Enclosure Model1503Version2only Temperatures lo and hi tem- peratures All Lights On, All Off Press 4 or the Show key 4 times, then Program StoragePress the Prog key Press the UNIT-NUMBER keyPress PROG, UNIT-NUMBER, 2, OFF Automatic Calculation of SUNRISE/ S U N S E TSince 600 PM is what we want, press Mmdd DAY If the display reads as above, press Press 9 for weekendsPress the Enter key Press Prog key if you aren’t already in the Program menuNow press *, Asleep Press Cancel so that this program is not storedSome other programming sugges- tions Procedure for programming a button is Display will read Prog GO to BED Front Porch DIM EnterDisplay will read GO to BED ALL OFF Display will read GO to BED Master Asleep Display will read RUN GO to BED Enter CancelPress Show to see the second and third programs for Button Press Cancel twice to exit the Show Programs menuPress TIME, 6, 0, 0, PM Press DATE-DAY, DATE-DAY, 8, Enter Example Program Button 2 to run at 600 PM every weekdayAppendix shows which buttons are activated for each zone Appendix shows which buttons are activated by which zones Display should show When Z6 ALM Stairwell on forDisplay should read When Away ALL OFF DRK When Z1 ALM if DRK Unit 1 onDisplay Conditional LITLight on Time ClocksPress PROG, *, 180, ENTER, UNIT-NUMBER, 1, ON, Enter 178, Enter when away ALL OFF 178, Enter when away Unit 1 onPrograms for when security off DAYS, ENTER, Enter Press the SET-UP key to go back to Show ProgramsPress the Show key Press the Show key to see the next program in memoryPrevious program in memory Show Programs for ALL Unit NumbersPulse and Tone Phones Remote Phones Phone Access Denied Remote Lockout Control Enter Unit NUMBER, then Pound KEY Goodbye Star * Cancel RepeatMessage Model 1503 Version 2 only Model 1503 will say HomeControl, then press the # key OFF Temperature is 76 DegreesMain Menu Unit numbers 17 and 19ASLEEP, 3 AWAY, Star * CAN- CEL Model 1503 will then confirm the new low settingEnter your code number ExamplesModel 1503 will say Button You will then be returned to the main menuTo hear the event log, press 7 from the main menu Fire Zone in ALARM, Trouble NOW or had TroubleZone X Zone Type Bypassed Had TroublePanic Button Over the Phone # # # Record MESSAGE, 8 Repeat Message Play ADDRESS, Star CancelTo Cancel from the message menu, press GoodbyePC Access Dial OUT 1 on Fire Alarm Dial OrderFreeze Alarm Dial Order Model 1503 Voice DIAL-OUT PlannerCode again Emergency Numbers Fire Police MedicalOther instructions Home PhoneDigital Dialer To turn all lights off, press SET Date SET TimeThrough 7 for Sunday To set up your CODES, press SET-UP, 1CodesDisplay will request your Remember Your NEW CodeThere are 4 auxiliary codes ENTER. To remove a code, enter 0000 in its place Auxiliary CodeMode OFF, press a 0 then press Enter Access the system from a lo- cal phonePress Show to advance the display to Exit Delay House Code HouseNumber Default setting for ENTRY/ Exit Chime is YES Default setting for Quick ARM Enabled is no To exit the set-up facility, press Default setting for TELE- Phone Access is onDefault setting for Answer Outside CALL? is YES Dial Type Default for Remote Commands OK? is YESFactory default for Rings Before Answer is Default dial type is ToneDial OUT 1 on Dial OUT 1 OFF Phone numbers can be up to 16 digitsDial OUT Number Dial OUT 4 on Dial OUT 4 OFF Dial OUT Number Dial OUT 2 on Dial OUT 2 OFFDial OUT Number Dial OUT 3 on Dial OUT 3 OFF Same as Dial OUT NumberDo not return to a burning house Installer Name NumberCanadian Department of COMMUNI- Cations Notice Federal Communications COMMIS- Sion Notice

1503 specifications

Home Automation 1503 is a state-of-the-art system designed to elevate the standards of modern living by integrating advanced technology into everyday activities within the home. This comprehensive solution seamlessly connects various household devices, allowing users to control them through a central interface, typically accessible via smartphones, tablets, or dedicated control panels.

One of the hallmark features of Home Automation 1503 is its interoperability. The system is compatible with a wide array of devices, ranging from lighting and HVAC systems to security cameras and smart appliances. This ensures that homeowners can create a cohesive and interconnected environment tailored to their specific needs.

The technologies underpinning Home Automation 1503 include wireless communication protocols such as Wi-Fi, Zigbee, and Z-Wave. These protocols facilitate reliable communication between devices, ensuring that commands are transmitted quickly and accurately. Additionally, the system employs AI and machine learning algorithms to create smart environments that adapt to user preferences, enhancing convenience and energy efficiency.

Another significant characteristic of Home Automation 1503 is its user-friendly interface. The system often features customizable dashboards, enabling users to monitor and manage their home from a single screen. Voice control capabilities, integrated with popular virtual assistants such as Amazon Alexa or Google Assistant, allow for hands-free operation, making everyday tasks even more convenient.

Security is a top priority in Home Automation 1503. The system supports advanced security features like smart locks, motion sensors, and video surveillance, all of which can be monitored remotely. Users receive real-time alerts on their devices, ensuring they are informed of any unusual activities around their homes.

Moreover, the energy management aspect of Home Automation 1503 cannot be overlooked. The system promotes energy-saving practices by allowing users to schedule lighting, heating, and appliance operation, reducing overall consumption and contributing to a more sustainable lifestyle.

In conclusion, Home Automation 1503 represents a significant advancement in home technology, enhancing security, convenience, and energy efficiency. With its diverse range of features, compatibility with various devices, and user-focused design, it offers a glimpse into the future of smart living, making homes not just places to live, but intelligent ecosystems that cater to the comfort and safety of their inhabitants.
Top Page Image Contents