Home Automation 1503 On for Alarm Unit Numbers, Default setting for ENTRY/ Exit Chime is YES

Page 73

ON FOR ALARM UNIT NUMBERS

The ON FOR ALARM UNIT NUMBERS are turned on when the alarm is activated and the interior sounder begins to sound. The factory de- fault is 129, for ALL LIGHTS ON. If you want appliances (a radio, for example) to come on too, enter 129 and its unit number. Up to 6 unit numbers (including 129 for ALL LIGHTS ON) can be entered.

To enter new ON FOR ALARM UNIT NUMBERS, enter each unit number, then press the ENTER key once.

Model 1503 Owner's

press ENTER.

ENTRY/EXIT CHIME

When ENTRY/EXIT CHIME is set to YES, the console(s) will beep once when a door on an entry/exit zone is opened, even if the alarm system is off. This lets you know when children enter or leave the house, etc.

If you wish to turn the ENTRY/EXIT CHIME off, press 0 then ENTER to turn the feature off. To turn it back on, press 1 then ENTER.

The console will NOT beep when you press ENTER after a unit num- ber.

When you have entered the last unit number (up to 6 numbers are allowed,) press enter twice.

The console will beep and the new numbers will be redisplayed indicating that they have been accepted.

FLASH FOR ALARM UNIT

You may enter one unit number that will flash on and off continu- ously when the alarm is activated. This should be an outside light to alert neighbors and police to your home if the alarm is activated.

The default FLASH FOR ALARM UNIT is unit number 2. You may enter one new number for the unit number you wish to have flash, 0 for none, or 129 for ALL LIGHTS.

To change the FLASH FOR ALARM UNIT number, enter the new unit number then

The default setting for ENTRY/ EXIT CHIME: is YES.

BEEP ON TROUBLE?

If the Model 1503 detects trouble with itself or one of the zones connected to it, it will display a message on the screen and beep the console twice per second, continuously (i.e. beep beep...beep beep...). You can silence this sound by pressing the CANCEL key. However, if the trouble occurs again, the beeper will start beep- ing again.

If you do not wish to hear the beeping sound when trouble occurs, set BEEP ON TROUBLE? to NO by pressing 0 then ENTER. To turn the feature back on, press 1 then ENTER to set it to YES.

The display will still show the trouble indication when BEEP ON TROUBLE? is set to NO.

The default setting for BEEP ON TROUBLE? is YES.

71

Page 72 Page 74
Image 73
Page 72 Page 74
Contents HomeAutomation,Inc Cancel Alarm SystemSECURITY-OFF, *, 2, ENTER, Code SECURITY-OFF, #, #, CodePage Contents Show Programs Show ALL Programs Delete Program Scrolling Through NamesALL OFF Status Events Goodbye Panic Button Over the Phone # # # # # # PC AccessSET-UP Model 1503 Default Settings Model 1503 Version Model NumberModel 1503 LC Serial NumberModel 1503 Version Model 1503-LC Differences Between Version 2 and LC ModelsDifferences in models are noted in this manual Things YOU should Know For more information, see To silence the beeper, press the Cancel keyThat’s all there is to it Silencing AlarmsTurning the Security System on Press the SECURITY-OFF keyL E E P Exit DelayTo quick arm the system in the Away mode, press AWAY, Away Then enter your master code number Burglar Alarm Activated System now waits the Outside Siren Delay 60 seconds Emergency ALARM! Police EMG BTN Tripped ALARM! Zone Name TrippedMediately Please Respond ImmediatelySpond Immediately Fire Alarm Fire EMG BTN TrippedMedical EMG BTN Tripped Alarm Reset Alarm Cancel Page Auxiliary Codes Master CodeUsed is recorded in the event log Duress CodeModel 1503-LC cannot use Model 1102 Expansion Enclosures Appliance Modules Module Types113 House Code X+2House Code X+3 ALL OFF Console will beep, and aMomentary ON/OFF Commands Temperature this is the air temperature read by the Pesm Freeze Alarm Temperature Control Appliances Model 1102 Expansion Enclosure Model1503Version2only Temperatures lo and hi tem- peratures All Lights On, All Off Press the Prog key Program StoragePress the UNIT-NUMBER key Press 4 or the Show key 4 times, thenSince 600 PM is what we want, press Automatic Calculation of SUNRISE/ S U N S E TPress PROG, UNIT-NUMBER, 2, OFF Mmdd DAY Press the Enter key Press 9 for weekendsPress Prog key if you aren’t already in the Program menu If the display reads as above, pressSome other programming sugges- tions Press Cancel so that this program is not storedNow press *, Asleep Procedure for programming a button is Display will read GO to BED ALL OFF EnterDisplay will read Prog GO to BED Front Porch DIM Press Show to see the second and third programs for Button Display will read RUN GO to BED Enter CancelPress Cancel twice to exit the Show Programs menu Display will read GO to BED Master AsleepAppendix shows which buttons are activated for each zone Example Program Button 2 to run at 600 PM every weekdayPress TIME, 6, 0, 0, PM Press DATE-DAY, DATE-DAY, 8, Enter Display should read When Away ALL OFF Display should show When Z6 ALM Stairwell on forAppendix shows which buttons are activated by which zones Display Conditional When Z1 ALM if DRK Unit 1 onLIT DRKLight on Time ClocksPress PROG, *, 180, ENTER, UNIT-NUMBER, 1, ON, Enter 178, Enter when away ALL OFF 178, Enter when away Unit 1 onPrograms for when security off DAYS, ENTER, Enter Press the Show key Show ProgramsPress the Show key to see the next program in memory Press the SET-UP key to go back toPrevious program in memory Show Programs for ALL Unit NumbersPulse and Tone Phones Remote Phones Phone Access Denied Remote Lockout Message Model 1503 Version 2 only Goodbye Star * Cancel RepeatModel 1503 will say Home Control Enter Unit NUMBER, then Pound KEYMain Menu OFF Temperature is 76 DegreesUnit numbers 17 and 19 Control, then press the # keyASLEEP, 3 AWAY, Star * CAN- CEL Model 1503 will then confirm the new low settingModel 1503 will say Button ExamplesYou will then be returned to the main menu Enter your code numberZone X Zone Type Bypassed Fire Zone in ALARM, Trouble NOW or had TroubleHad Trouble To hear the event log, press 7 from the main menuTo Cancel from the message menu, press Record MESSAGE, 8 Repeat Message Play ADDRESS, Star CancelGoodbye Panic Button Over the Phone # # #PC Access Freeze Alarm Dial Order Fire Alarm Dial OrderModel 1503 Voice DIAL-OUT Planner Dial OUT 1 onOther instructions Emergency Numbers Fire Police MedicalHome Phone Code againDigital Dialer To turn all lights off, press SET Date SET TimeDisplay will request your To set up your CODES, press SET-UP, 1CodesRemember Your NEW Code Through 7 for SundayThere are 4 auxiliary codes ENTER. To remove a code, enter 0000 in its place Auxiliary CodePress Show to advance the display to Access the system from a lo- cal phoneMode OFF, press a 0 then press Enter Exit Delay Number HouseHouse Code Default setting for ENTRY/ Exit Chime is YES Default setting for Quick ARM Enabled is no Default setting for Answer Outside CALL? is YES Default setting for TELE- Phone Access is onTo exit the set-up facility, press Factory default for Rings Before Answer is Default for Remote Commands OK? is YESDefault dial type is Tone Dial TypeDial OUT 1 on Dial OUT 1 OFF Phone numbers can be up to 16 digitsDial OUT Number Dial OUT 3 on Dial OUT 3 OFF Dial OUT Number Dial OUT 2 on Dial OUT 2 OFFSame as Dial OUT Number Dial OUT Number Dial OUT 4 on Dial OUT 4 OFFDo not return to a burning house Installer Name NumberCanadian Department of COMMUNI- Cations Notice Federal Communications COMMIS- Sion Notice

1503 specifications

Home Automation 1503 is a state-of-the-art system designed to elevate the standards of modern living by integrating advanced technology into everyday activities within the home. This comprehensive solution seamlessly connects various household devices, allowing users to control them through a central interface, typically accessible via smartphones, tablets, or dedicated control panels.

One of the hallmark features of Home Automation 1503 is its interoperability. The system is compatible with a wide array of devices, ranging from lighting and HVAC systems to security cameras and smart appliances. This ensures that homeowners can create a cohesive and interconnected environment tailored to their specific needs.

The technologies underpinning Home Automation 1503 include wireless communication protocols such as Wi-Fi, Zigbee, and Z-Wave. These protocols facilitate reliable communication between devices, ensuring that commands are transmitted quickly and accurately. Additionally, the system employs AI and machine learning algorithms to create smart environments that adapt to user preferences, enhancing convenience and energy efficiency.

Another significant characteristic of Home Automation 1503 is its user-friendly interface. The system often features customizable dashboards, enabling users to monitor and manage their home from a single screen. Voice control capabilities, integrated with popular virtual assistants such as Amazon Alexa or Google Assistant, allow for hands-free operation, making everyday tasks even more convenient.

Security is a top priority in Home Automation 1503. The system supports advanced security features like smart locks, motion sensors, and video surveillance, all of which can be monitored remotely. Users receive real-time alerts on their devices, ensuring they are informed of any unusual activities around their homes.

Moreover, the energy management aspect of Home Automation 1503 cannot be overlooked. The system promotes energy-saving practices by allowing users to schedule lighting, heating, and appliance operation, reducing overall consumption and contributing to a more sustainable lifestyle.

In conclusion, Home Automation 1503 represents a significant advancement in home technology, enhancing security, convenience, and energy efficiency. With its diverse range of features, compatibility with various devices, and user-focused design, it offers a glimpse into the future of smart living, making homes not just places to live, but intelligent ecosystems that cater to the comfort and safety of their inhabitants.
Top Page Image Contents