Motorola HS810 Pairing Your Headset and Phone, Paired Link to Additional Devices, Step Result

Using Your Headset

Pairing Your Headset and Phone

Note: You must pair your headset and phone before you can make a call.

“Pairing” creates a link between devices equipped with Bluetooth wireless technology and allows the phone to remember the headset’s unique ID. Once your headset and phone are paired, your headset automatically connects to your phone any time you open the boom.

Pairing

With the headset and phone in close proximity:

Step	Result
1 Put the headset into pairing mode.	The headset indicator turns on.

aWith the headset’s boom closed, press and hold the Multifunction Button E until the headset indicator turns on (about 3 seconds).

bRelease the button, then open

the headset boom. The indicator remains lit.

12

Using Your Headset

Step	Result
2 Perform a device discovery from	When the scan is complete, the
the phone.	phone displays the devices
For details on device discovery	found.
for your phone, refer to the
user’s guide for the phone.
3 Select the Motorola HS810 from the
discovered devices list and confirm
following the on screen prompts.
4 When prompted by the phone, enter	The device ID is now stored in
the passkey 0000 and confirm to	the phone’s memory.
pair the headset with the phone.	Pairing is successful when the
	headset indicator flashes 10
	times rapidly.

Paired Link to Additional Devices

Your headset can store pairing information for up to eight different devices equipped with Bluetooth wireless technology. Devices are stored in a “Paired Device List” in memory in chronological order. When an attempt to pair to more than eight devices is made, the oldest paired device is removed from the list.

Any of the eight paired devices can initiate a paired connection to the headset.

13