Using the Smart Touch Control

You can use the MIC to give Voice Recognition commands. Simply press the VOICE˜ button.

✎Voice Recognition function can be affected by unclear pronunciation, voice level, or surrounding noise.

		Turn on and off the satellite or cable set-top
		box connected to the TV. For this, the Smart
		Touch Control must be confi gured as a
	Turns the TV on and off.	universal remote control.
	Displays and selects the available video	VOICE˜
	sources.	VOICE˜
	sources.	Take your voice command and enter a text
		Take your voice command and enter a text
		using your voice.
	Cuts off the sound	Changes channels.
	temporarily.	Changes channels.
	temporarily.
	Press and hold this button	Displays a virtual remote panel on the screen.
	to select Audio Description	Displays a virtual remote panel on the screen.
	to select Audio Description	See the e-Manual chapter, Controlling TV >
	and Subtitle. (Depending on	See the e-Manual chapter, Controlling TV >
	and Subtitle. (Depending on	Using the Virtual Remote Control.
	the country or region.)	Using the Virtual Remote Control.
	the country or region.)	Press and hold the MORE button to select a
		Press and hold the MORE button to select a
		desired function (e.g. MENU (m),
		TOOLS (T), INFO (`), etc.) easily.
		TouchPad
		• Drag on the touchpad to move the focus
	Adjusts the volume.	on the screen.
	Adjusts the volume.	• Press the touchpad to run, activate, or
		• Press the touchpad to run, activate, or
		select the highlighted item.
		• Press and hold the touchpad to display
	Toggles this button between Recommended	the Channel List.
	and Search.
		The colour buttons work differently, depending
		on the function that the TV is currently
	Returns to the previous menu. Press and	performing.
	Returns to the previous menu. Press and	Press and hold the { button while watching
	hold this button to exit all currently running	Press and hold the { button while watching
	applications.	TV to view information about the current
	applications.	programme.
		programme.
	Brings up Smart Hub applications. See the
	e-Manual chapter, Smart TV Features >	View each digital channel's programming
	Smart Hub.	View each digital channel's programming
	Smart Hub.	schedule, including showtimes. In addition,
	✎To exit an application that is running,	schedule, including showtimes. In addition,
	✎To exit an application that is running,	sets a Schedule Viewing or Schedule
	press the ™ button.	Recording to press the touchpad on the
		programme entry scheduled to air later.

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV.

✎We recommend to use the Smart Touch Control in less than 6m. A usable distance may differ depending on the wireless environmental conditions.

1.When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the TV button for the fi rst pairing. Only this buttons sends an IR signal. The remote control receiver's location may vary depending on the model.

2.A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically.

Reconnecting the Smart Touch Control

<The Smart Touch Control's pairing button>

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused by insuffi cient battery power. If the problem persists, press the PAIRING button on the Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be accessed without removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the Smart Touch Control to the TV receiver and press the PAIRING button. When pairing is complete, the pairing image displays at the bottom left of the TV screen.

English - 5

English

[UF8500-XN_ZF]BN68-04803D-02L04.indb 5

2013-11-01 10:27:01