Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)
✎✎ Depending on the country and model.
✎✎ Turn the TV off to connect or disconnect a CI card.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.
•• The pairing information containing a telephone number, the “CI or |
|
CI+ CARD” ID the Host ID and other information will be displayed |
|
in about 2~3 minutes. If an error message is displayed, please |
|
contact your service provider. | •• The image may differ depending on the |
| |
•• When the configuration of channel information has finished, the | model. |
| |
message “Updating Completed” is displayed, indicating the |
|
channel list is updated. |
|
✎✎ NOTE |
|
•• You must obtain a “CI or CI+ CARD” from a local cable service provider.
•• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
•• Insert the “CI or CI+ CARD” in the direction marked on the card.
•• The location of the COMMON INTERFACE slot may be different depending on the model.
•• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorised dealer.
•• If you have any problems, please contact a service provider.
•• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.