Samsung LH55PHFPBGC/EN manual Setting the current time, Select Edit  Setup Select Time Zone

Page 52

Chapter 4. Home screen

7Select the All menu to check that the device has been registered.

8When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded.

For further details on how to configure a schedule, refer to the “MagicInfo Server user’s manual”.

If a device is deleted from the list of devices approved by the server, the device will reboot to reset its settings.

52

Setting the current time

A schedule may not run if the time set on the device is different from the server’s current time.

1Select Device from the side menu bar.

2Select your device.

3Select Edit Setup.

4Select Time Zone.

‒‒ When connecting to the server for the first time, the time on the product is set using the GMT time of the region where the server is installed.

‒‒ The time on the product can be changed from the server.

‒‒ Turning the product off and then on again will restore the time setting on the product to the last time that was set from the server.

For further details on how to manage the time (scheduling, holiday management, etc.), refer to the “MagicInfo Server user’s manual”.

Image 52
Contents Page Table of contents Troubleshooting About this manual SymbolsCopyright Safety precautions SafetyElectricity and safety Installation Children may suffocateOperation Children may become injured or seriously harmedStorage Product may fall and become damaged or cause an injuryCleaning Precautions when handling the panelInstallation Device setupWhat’s Included Parts Panel keyRemote sensor and spacer logo optional Remote sensorReverse side Spacer logo optionalAnti-theft lock To lock an anti-theft locking devicePort Description PM32F/PM43F PM49F/PM55F models Only RJ45Plug In Module Sold separately PIM slotRemote control VOLTo place batteries in the remote control C DGuided installation Installation on a perpendicularwallInstallation on an indented wall VentilationWall mount installation Preparing before installing wall mountInstalling the wall mount Wall mount kit specifications VesaModel name  PM32F  PM43F / PH43F Vesa screw hole specs a * B Standard screwInches mm 400.0 mm * 400.0 mmExternal connection CheckpointsCable Connection  RS232C CableDirect LAN cable PC to HUB LAN CableCross LAN cable PC to PC Viewing control state Get control command Controlling Set control commandControl Codes ConnectionCommand Power controlVolume control Input source controlScreen mode control Setting the input source Set Input SourceViewing screen status Get Screen Mode Status Setting the picture size Set Picture SizeScreen size control PIP On/Off controlViewing the screen size Get Screen Size Status Viewing PIP on/off state Get the PIP ON/OFF StatusAuto adjustment control PC and BNC only Video Wall Mode ControlSafety Lock Setting the video wall Set Video Wall ModeViewing the safety lock state Get Safety Lock Status Full NaturalVideo Wall On Video Wall User Control10x10 Video Wall Model 1 ~ Set Number Data 0x01 0x02 0x63 100 0x64Connection using a D-SUB cable Analog type Connection using a DVI cable Digital typePC connection  Sound → set Hdmi Sound to Pcdvi Connection using an HDMI-DVI cable System → General → set Hdmi Hot Plug to Off Connection using an DP cable Connection using an Hdmi cablePrecautions for using DP AV connection ‒‒ Sound → set Hdmi Sound to AvhdmiConnection using an Hdmi cable up to 1080p Audio system connectionLAN connection Source selectionSource EditUninstallation Installation/uninstallationPC software Multiple Display Control Using the RS-232C cable Using the ethernet cableConnection using a direct LAN cable ConnectionConnection using a cross LAN cable Viewing content Home screenPlayer Home → Player →When content is running File formats compatible with PlayerControl buttons on the remote Available menuTemplate files and LFD.lfd files RestrictionsContents Power Point VideoAudio ImageTemplate files Supported in Network Channel and Local ChannelURL Launcher Setting ScheduleURL Launcher Clone ProductID Settings Device IDDevice ID Auto Set PC Connection CableNetwork Status Video WallVideo Wall On/Off Timer Picture ModeOn Timer Off Timer TickerHome → Ticker →  Off / OnApproving a connected device from the server Setting the current time Select Edit  Setup Select Time ZoneScreen adjustment 2nd 3rd Picture ModeMenu PictureWhen this setting is on, only UHD products are supported Analog Clean View Film ModeAuto Adjustment Hdmi Black LevelReset Picture Image ResetPicture Off OnScreen Display OnScreen display adjustment2nd 3rd Description Timer Immediate displaySound adjustment If Sound Output is set to External, Auto Volume is disabledSound Audio receiver. If this occurs, set the product to ExternalBroadcasting adjustment BroadcastingNetwork NetworkNetwork Network Settings Wired Connecting to a Wired NetworkAutomatic Network Settings Wired Manual Network Settings WiredHow to set up automatically How to set up manuallyConnecting to a Wireless Network Network Setting WirelessAutomatic Network Setup Wireless How to set up using Wpspbc Manual Network Setup WirelessSelect Add Network System SystemPower On Delay Auto Source SwitchingPrimary Source Recovery Power Control Auto Power OnMessage to On Temperature Control Security Safety LockInput Device Manager Play viaTouch Control Lock Remote ManagementGeneral Smart Security Anynet+ HDMI-CECExperience by selecting game mode Game ModeReset System Troubleshooting forAnynet+ Anynet+ HDMI-CECAnynet+ HDMI-CEC System menuProblem Possible Solution Anynet+ device Support SupportTroubleshooting Screen ResolutionBefore you contact us DiagnosisScreen issue Installation issue PC mode Not Optimum Mode is displayed Adjust Brightness and Contrast Sound issue Go to Sound and change Sound Output to InternalSource device issue Remote control issueOther issue Defined resolution is not supported. appears Frequently asked questions Question Answer How can I change the frequency?Appendix SpecificationsGeneral Plug-and-Play MAC, 640 x Standard signal mode tableMAC, 832 x VESA, 640 x VESA, 800 xVESA, 1024 x VESA, 1152 xNot a product defect Product damage caused by customer’s faultOthers What is afterimage burn-in? Optimum picture quality and afterimage burn-in preventionOptimum picture quality Prevention of afterimage burn-inPreventing afterimage burn-in OZ348 2030 UA102 2110License Open Source Licence Notice
Related manuals
Manual 89 pages 12.2 Kb Manual 90 pages 42.67 Kb Manual 91 pages 40.68 Kb Manual 89 pages 59.02 Kb Manual 90 pages 36.39 Kb Manual 87 pages 7.51 Kb Manual 88 pages 4.1 Kb Manual 87 pages 6.28 Kb Manual 87 pages 12.52 Kb Manual 106 pages 22.27 Kb Manual 88 pages 55.71 Kb Manual 88 pages 2.02 Kb Manual 88 pages 27.14 Kb Manual 91 pages 18.79 Kb Manual 85 pages 27.41 Kb Manual 88 pages 62.34 Kb Manual 2 pages 16.4 Kb Manual 2 pages 18.27 Kb Manual 106 pages 58.74 Kb Manual 87 pages 10.83 Kb Manual 106 pages 12.52 Kb Manual 88 pages 24.84 Kb Manual 2 pages 14.49 Kb Manual 106 pages 7.27 Kb Manual 2 pages 16.45 Kb Manual 87 pages 34.06 Kb Manual 84 pages 39.01 Kb

LH32PMFPBGC/EN, LH43PHFPMGC/EN, LH55PMFPBGC/EN, LH55PHFPBGC/EN, LH49PMFPBGC/EN specifications

Samsung's line of professional display solutions, particularly the LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models, exemplifies the company's commitment to innovation and quality in digital signage technology. These models are designed to meet the diverse needs of businesses and organizations, providing exceptional visual performance, durability, and versatility.

A standout feature of these displays is their remarkable picture quality, characterized by vibrant colors and sharp images that enhance the viewer's experience. This is achieved through Samsung's advanced LED technology, which ensures high brightness and contrast ratios. Additionally, the displays support 4K resolution, delivering stunning detail that is essential for capturing audience attention in retail environments, corporate settings, or public spaces.

The series also incorporates HDR (High Dynamic Range) capabilities, allowing for a broader range of colors and luminance levels. This feature is particularly beneficial for content that requires precision and depth, enabling businesses to showcase their products or services in the best possible light. Furthermore, with a high refresh rate, these displays minimize lag, ensuring smooth transitions and motion, which is critical in dynamic content presentation.

Durability is a crucial aspect of these professional displays. Designed for 24/7 operation, they can withstand the rigors of continuous use without compromising performance. The robust build is complemented by a sleek, modern design that fits seamlessly into various environments, from retail stores to conference rooms.

Connectivity options are extensive, making it easy to integrate these displays into existing systems. With multiple HDMI and USB ports, users can easily connect various devices, enhancing flexibility in content management and delivery. Built-in Wi-Fi capabilities further facilitate wireless content sharing, enabling users to update and control displays remotely.

The intuitive user interface simplifies content management, allowing for quick and efficient scheduling and playback of media. This is particularly advantageous for businesses that require regular updates to their displays.

In summary, the Samsung LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models stand out in the digital signage market due to their breathtaking visuals, robust performance, and user-friendly features. These displays are engineered to deliver exceptional results, making them an excellent choice for any business looking to enhance its communication and engagement strategies. Whether it’s for advertising, information dissemination, or immersive experiences, Samsung’s professional displays are a reliable and high-quality solution.