Samsung LH43PHFPMGC/EN, LH49PMFPBGC/EN, LH55PHFPMGC/EN Problem Possible Solution Anynet+ device

Page 74

Chapter 5. Menu

74

Problem

Possible Solution

The Anynet+ device

• You cannot use the play function when initial setup is in

does not play.

progress.

 

 

The connected device

• Check whether or not the device supports Anynet+

is not displayed.

functions.

 

• Check whether or not the HDMI cable is properly

 

connected.

 

• Check whether Anynet+ (HDMI-CEC)is set to On in the

 

System menu.

 

• Search Anynet+ devices again.

 

• Anynet+ requires an HDMI connection. Make sure

 

the device is connected to your product with an HDMI

 

cable.

 

• Some HDMI cables may not support Anynet+ functions.

 

• If the connection is terminated because there has

 

been a power failure or the HDMI cable has been

 

disconnected, please repeat the device scan.

 

 

Image 74
Contents Page Table of contents Troubleshooting Copyright SymbolsAbout this manual Electricity and safety SafetySafety precautions Installation Children may suffocateOperation Children may become injured or seriously harmedStorage Product may fall and become damaged or cause an injuryCleaning Precautions when handling the panelWhat’s Included Device setupInstallation Remote sensor and spacer logo optional PartsPanel key Remote sensorReverse side Spacer logo optionalPort Description Anti-theft lockTo lock an anti-theft locking device PM32F/PM43F PM49F/PM55F models Only RJ45Plug In Module Sold separately PIM slotRemote control VOLTo place batteries in the remote control C DInstallation on an indented wall Guided installationInstallation on a perpendicularwall VentilationInstalling the wall mount Wall mount installationPreparing before installing wall mount Wall mount kit specifications VesaInches mm Model name  PM32F  PM43F / PH43FVesa screw hole specs a * B Standard screw 400.0 mm * 400.0 mmCable Connection External connectionCheckpoints  RS232C CableCross LAN cable PC to PC LAN CableDirect LAN cable PC to HUB Control Codes Viewing control state Get control commandControlling Set control command ConnectionCommand Power controlVolume control Input source controlViewing screen status Get Screen Mode Status Screen mode controlSetting the input source Set Input Source Setting the picture size Set Picture SizeViewing the screen size Get Screen Size Status Screen size controlPIP On/Off control Viewing PIP on/off state Get the PIP ON/OFF StatusAuto adjustment control PC and BNC only Video Wall Mode ControlViewing the safety lock state Get Safety Lock Status Safety LockSetting the video wall Set Video Wall Mode Full NaturalVideo Wall On Video Wall User Control10x10 Video Wall Model 1 ~ Set Number Data 0x01 0x02 0x63 100 0x64PC connection Connection using a DVI cable Digital typeConnection using a D-SUB cable Analog type  System → General → set Hdmi Hot Plug to Off Connection using an HDMI-DVI cable Sound → set Hdmi Sound to Pcdvi Precautions for using DP Connection using an Hdmi cableConnection using an DP cable AV connection ‒‒ Sound → set Hdmi Sound to AvhdmiConnection using an Hdmi cable up to 1080p Audio system connectionSource LAN connectionSource selection EditPC software Multiple Display Control Installation/uninstallationUninstallation Connection using a direct LAN cable Using the RS-232C cableUsing the ethernet cable ConnectionConnection using a cross LAN cable Player Viewing contentHome screen Home → Player →Control buttons on the remote When content is runningFile formats compatible with Player Available menuTemplate files and LFD.lfd files RestrictionsContents Audio Power PointVideo ImageTemplate files Supported in Network Channel and Local ChannelURL Launcher URL Launcher SettingSchedule Clone ProductDevice ID Auto Set ID SettingsDevice ID PC Connection CableVideo Wall Video WallNetwork Status On Timer Picture ModeOn/Off Timer Home → Ticker → Off TimerTicker  Off / OnApproving a connected device from the server Setting the current time Select Edit  Setup Select Time ZoneMenu Screen adjustment2nd 3rd Picture Mode PictureWhen this setting is on, only UHD products are supported Auto Adjustment Analog Clean ViewFilm Mode Hdmi Black LevelPicture Off Image ResetReset Picture 2nd 3rd Description OnScreen display adjustmentOnScreen Display Timer Immediate displaySound Sound adjustmentIf Sound Output is set to External, Auto Volume is disabled Audio receiver. If this occurs, set the product to ExternalBroadcasting adjustment BroadcastingNetwork NetworkNetwork Network Settings Wired Connecting to a Wired NetworkHow to set up automatically Automatic Network Settings WiredManual Network Settings Wired How to set up manuallyAutomatic Network Setup Wireless Network Setting WirelessConnecting to a Wireless Network Select Add Network Manual Network Setup WirelessHow to set up using Wpspbc System SystemPrimary Source Recovery Power On DelayAuto Source Switching Power Control Auto Power OnMessage to On Input Device Manager Temperature ControlSecurity Safety Lock Play viaGeneral Smart Security Touch Control LockRemote Management Anynet+ HDMI-CECReset System Game ModeExperience by selecting game mode Anynet+ HDMI-CEC Troubleshooting forAnynet+Anynet+ HDMI-CEC System menuProblem Possible Solution Anynet+ device Support SupportBefore you contact us TroubleshootingScreen Resolution Diagnosis Not Optimum Mode is displayed Installation issue PC modeScreen issue Adjust Brightness and Contrast Sound issue Go to Sound and change Sound Output to InternalOther issue Remote control issueSource device issue Defined resolution is not supported. appears Frequently asked questions Question Answer How can I change the frequency?General SpecificationsAppendix Plug-and-Play MAC, 832 x Standard signal mode tableMAC, 640 x VESA, 1024 x VESA, 640 xVESA, 800 x VESA, 1152 xOthers Product damage caused by customer’s faultNot a product defect Optimum picture quality What is afterimage burn-in?Optimum picture quality and afterimage burn-in prevention Prevention of afterimage burn-inPreventing afterimage burn-in OZ348 2030 UA102 2110License Open Source Licence Notice
Related manuals
Manual 106 pages 22.27 Kb Manual 106 pages 58.74 Kb Manual 106 pages 12.52 Kb Manual 88 pages 62.34 Kb Manual 2 pages 18.27 Kb Manual 87 pages 10.83 Kb Manual 106 pages 7.27 Kb Manual 88 pages 23.61 Kb Manual 2 pages 14.49 Kb Manual 89 pages 12.2 Kb Manual 90 pages 42.67 Kb Manual 91 pages 40.68 Kb Manual 89 pages 59.02 Kb Manual 90 pages 36.39 Kb Manual 87 pages 7.51 Kb Manual 88 pages 4.1 Kb Manual 87 pages 6.28 Kb Manual 87 pages 12.52 Kb Manual 88 pages 55.71 Kb Manual 88 pages 2.02 Kb Manual 88 pages 27.14 Kb Manual 91 pages 18.79 Kb Manual 85 pages 27.41 Kb Manual 2 pages 16.4 Kb Manual 88 pages 24.84 Kb Manual 2 pages 16.45 Kb Manual 87 pages 34.06 Kb Manual 84 pages 39.01 Kb

LH32PMFPBGC/EN, LH43PHFPMGC/EN, LH55PMFPBGC/EN, LH55PHFPBGC/EN, LH49PMFPBGC/EN specifications

Samsung's line of professional display solutions, particularly the LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models, exemplifies the company's commitment to innovation and quality in digital signage technology. These models are designed to meet the diverse needs of businesses and organizations, providing exceptional visual performance, durability, and versatility.

A standout feature of these displays is their remarkable picture quality, characterized by vibrant colors and sharp images that enhance the viewer's experience. This is achieved through Samsung's advanced LED technology, which ensures high brightness and contrast ratios. Additionally, the displays support 4K resolution, delivering stunning detail that is essential for capturing audience attention in retail environments, corporate settings, or public spaces.

The series also incorporates HDR (High Dynamic Range) capabilities, allowing for a broader range of colors and luminance levels. This feature is particularly beneficial for content that requires precision and depth, enabling businesses to showcase their products or services in the best possible light. Furthermore, with a high refresh rate, these displays minimize lag, ensuring smooth transitions and motion, which is critical in dynamic content presentation.

Durability is a crucial aspect of these professional displays. Designed for 24/7 operation, they can withstand the rigors of continuous use without compromising performance. The robust build is complemented by a sleek, modern design that fits seamlessly into various environments, from retail stores to conference rooms.

Connectivity options are extensive, making it easy to integrate these displays into existing systems. With multiple HDMI and USB ports, users can easily connect various devices, enhancing flexibility in content management and delivery. Built-in Wi-Fi capabilities further facilitate wireless content sharing, enabling users to update and control displays remotely.

The intuitive user interface simplifies content management, allowing for quick and efficient scheduling and playback of media. This is particularly advantageous for businesses that require regular updates to their displays.

In summary, the Samsung LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models stand out in the digital signage market due to their breathtaking visuals, robust performance, and user-friendly features. These displays are engineered to deliver exceptional results, making them an excellent choice for any business looking to enhance its communication and engagement strategies. Whether it’s for advertising, information dissemination, or immersive experiences, Samsung’s professional displays are a reliable and high-quality solution.