Samsung SHR-5040P/XEG, SHR-5042P/XEG manual Setting the Audio ON/OFF, Freezing and Zooming

Page 22

Selecting live screen mode

Each mode can be selected by using the MODE button and CH1 to CH4 buttons.

The following figure shows the diagram of changing modes.

4 Split

 

MODE button

Auto

PIP

Sequence

 

The starting mode is the 4 split screen mode.

Modes except for the full screen can be sequentially selected by using the MODE button.

Whenever pressing the MODE button, the mode is switched in the following sequence: [4 Split] [PIP] [Auto Sequence] [4 Split].

You can see the full screen for each channel by selecting the respective buttons of CH1~CH4.

When switching to the full screen from the split screen mode, you can return to the previous split mode screen by pressing the MODE button.

SETTING THE AUDIO ON/OFF

From the split mode except for the full screen mode and auto sequence mode, any channel displayed on each split mode can be arbitrarily selected. Also, in live mode, you can activate or deactivate the channels with Audio On settings.

Audio On/Off setting in the full screen mode

In the full screen mode, the audio function of the selected channel is automatically turned on and you can set the

Audio On/Off function by toggling the AUDIO button. The Audio icon is changed to yellow or white on the corresponding channel according to the Audio On/Off state.

Audio On/Off setting in 4-split mode

If you press the Enter( ) button in the 4 split mode, the selection cursor appears as shown in the figure below and the corresponding channel is selected.

If the AUDIO button is pressed after selecting a channel, you can set the Audio On/Off function of the corresponding channel. At this time, the audio icon is changed to yellow or white on the corresponding channel according to the Audio On/Off state.

CAM_01

CAM_02

 

 

CAM_03

CAM_04

 

 

Channel Seletion & Audio On/Off Setting in PIP mode

If you press the Enter( ) button in the 4 split mode, the selection cursor appears and the corresponding channel is selected.

After selecting a channel, you can enter the channel using

the CH1 to CH4 buttons and can set the Audio On/Off function as in the 4 split mode by using the AUDIO button. At this time, the Audio icon is changed to yellow or white on the corresponding channel according to the Audio On/Off state.

FREEZING AND ZOOMING

Freeze function

The Freeze function, temporarily stops the video on the current live screen but it is active only in the live mode. You can set the Freeze On/Off function by using the FREEZE button.

18_ live

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Real Time DVR Key features of your DVR WHAT’S Included with Your DVRSafety regulations Before start BatteryOperating Temperature Standards ApprovalsContents Search and Play Appendix Controls on the DVR SHR-5040 SHR-5042Name Function Set up the audio On/Off function This LED indicates the status of backup operationWhen an alarm occurs, it cancels the alarm HDD, this LED repeatedly blinksButton Time set from the system setupDisplay the 4-split screens Display the 9-split screensReal Panel Jacks RS-232CFR fast rewind Remote ControlUsing the Numeric Buttons FF fast forwardPlaying EnterInstallation Checking Installation EnvironmentConnecting with other devices Connecting VIDEO, AUDIO, and MonitorConnecting to Internet through Ethernet 10/100BaseT Connecting the NetworkConnecting to Internet through Adsl Connecting the Alarm Input Connecting the Alarm Output Connecting the RS-485 Device Connecting the USBOperating the System Live Screen ModeLive Live screen iconsLive screen modes OSD Position Control FunctionSetting the Audio ON/OFF Freezing and ZoomingSPOT-OUT Monitoring Function by using the Zoom buttonEvent Monitoring Zoom functionBefore USE Menu setupUser Login System Old Password Time/Date/Language SetupPassword  DST Daylight Saving TimeGroup Authority Backup item allows granting the backup setup rightUser Add/Del  MenuProfile System LogSystem Log List Log Type Log Details DescriptionBackup SFX-OK/FAILED Backup AVI-OK/FAILEDBackup SDB-OK/FAILED Backup JPEG-OK/FAILED For the DVR to recognize the update file System Information & SetupHDD Setup  HDD Info HDD END  HDD END AlarmCamera Checking HDD DataAvailable PTZ Lists Camera Configuration PTZ DeviceModel Monitoring Screen SetupLive Mode ContinueSpot Mode Video Full D1 Half D1 Record ModeEvent Record Source Post Event Alarm Detection SetupAlarm Detection Setup  CameraMotion Detection Setup Motion Detection SetupVideo Loss Detection Setup Video Loss Detection SetupSymbol BackupSetup Record ScheduleIP Setup NetworkIP Test Ddns SetupDdns Setup  Site IP Ddns Site NTP SetupNTP Setup  Host Name Sets the host name of the Ddns site  User IDArea NTP Server Address Transfer Picture SetupNTPNetwork Time Protocol Server List USABasic Operation of PAN, Tilt & Zoom PTZ Camera Control ModePTZ camera control  PANPTZ Device Menu Setup Preset SetupCamera Menu Setup AppearsRecording Recording will be made with the record mode setup Alarm Detection Recnormal RecordingSearch Date & Time Selection Search and playSearch Screen Date Color DescriptionPlayback Alarm In RecordingSearch Channel Selection & Recording Graph Graph Color Description Audio On/Off  Play Screen Mode Split ScreenMode using to CH1 ~ CH4 buttons Split Screen Single ScreenAppendix Net I Setup toolTo manually register a device Reply message Comments Net I Live Viewer Viewing the device-related settingsTo modify the registered device Using layouts Net I Search Viewer Setup menu buttonsStorage/Cancel of Changed Information Before useResource Recording Event Obtain an IP Address Automatically Dhcp AlarmConnection Obtain DNS Server Address AutomaticallySFX Player Execution Date/Time SetupSFX Player Date/TimeConnect through Domain Connect through IP address WebdvrConnect WebDVR ‘ff00c7’ the last 6 char of MAC Address, ‘hScreen division button WebDVR Main ModeView panel Choose between 4/6/9/10/16 screen divisionsPOP-UP Menu Names FeaturesPop-up Menu If user press Enter button, the pop-up menu will disappear This button controls PTZ directions at PTZ modeIt executes Freeze feature at Live screen VideoSpecifications SHR-5040 SHR-5042Outline Drawings Troubleshootingsfaq Connected sensors are not working Color or in abnormal shapeCause ProperlyPreamble Open Source License Report on the ProductWe protect your rights with two steps Appendix No Warranty How to Apply These Terms to Your New Programs Repair or CorrectionWe protect your rights with a two-step method Appendix Appendix Executable If you develop a new library, and you want it to How to Apply These Terms to Your New LibrariesFoundation License, or at your option any later versionOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’
Related manuals
Manual 78 pages 51.54 Kb Manual 78 pages 9.03 Kb Manual 78 pages 18.48 Kb Manual 78 pages 59.16 Kb Manual 78 pages 51.74 Kb Manual 78 pages 35.34 Kb

SHR-5040P, SHR-5042P, SHR-5040P/CZC, SHR-5040P/XEC, SHR-5042P/XEF specifications

Samsung's SHR-5042P/XEG, SHR-5040P/XET, SHR-5040P/XEG, SHR-5042P/XET, and SHR-5042P/XEC models are advanced surveillance solutions designed to meet the diverse needs of both residential and commercial security applications. Each unit combines cutting-edge technology, robust features, and ease of use to provide high-quality surveillance.

One of the standout features of these models is their ability to support high-definition video recording. With resolutions of up to 1080p, they ensure that users can capture clear and detailed footage, which is crucial for identifying faces and license plates in security situations. The models support multiple camera inputs, allowing users to connect various cameras for comprehensive coverage of any area.

The integration of H.264 compression technology in these DVRs significantly reduces file sizes while maintaining high image quality. This feature not only saves storage space but also facilitates quicker uploads and easier sharing of video footage, making it easier to manage recordings over extended periods.

These Samsung models come equipped with a powerful and user-friendly interface, making navigation simple for users of all skill levels. Remote access capabilities enable users to view live feeds or recorded footage from anywhere in the world via a compatible mobile device or computer. This ensures peace of mind, as users can monitor their properties in real-time.

Additionally, these models are built with durability in mind. They are designed to operate effectively under a wide range of environmental conditions, ensuring reliable performance in various settings. The SHR series also includes features such as motion detection, night vision, and continuous recording, which enhance their functionality and adaptability to different surveillance needs.

The SHR-5042P/XEG, SHR-5040P/XET, SHR-5040P/XEG, SHR-5042P/XET, and SHR-5042P/XEC DVRs are also compatible with Samsung's range of IP cameras, allowing for flexible expansion as security needs grow. Users benefit from a scalable solution that can adapt to changing requirements over time.

In summary, Samsung's SHR series represents a blend of durability, advanced technology, and user-centric design. These models are a solid choice for those seeking reliable and high-quality surveillance solutions that are easy to operate and maintain, offering peace of mind whether at home or in a business environment.
Top Page Image Contents