Samsung SHR-5042P/CZC, SHR-5040P/XEG Camera Configuration PTZ Device, Available PTZ Lists, Model

Camera Configuration

PTZ Device

Camera Configuration

Video	Auto Seq	Title
On	5 SEC	CAM 01
On	5 SEC	CAM 02
On	5 SEC	CAM 03
On	5 SEC	CAM 04
		OK	Cancel
Move/Control		Select	Exit

PTZ Device

ID

0

1

2

3

Move/Control

Protocol

Samsung

PELCO-D SD GC-755 DRX-501A

Select

Baudrate 9600 9600 19200 2400

OK Cancel

Exit

Video

On: It shows the video of the selected channel.

Off: It does not show the video of the selected channel.

Covert: It shows the remaining information except for the video information of the selected channel.

The functions such as audio/camera name/auto sequence are not available for the Off channel.

Auto Seq

You can set the auto sequencing interval for each channel. The setting applies in the live mode. The channel set with “Off” or “Covert” is not shown in the auto sequence mode.

Title

The camera name of the selected channel can be set. A virtual keyboard appears if you press the Enter( ) button.

Characters can be input one by moving the cursor. You can input up to 10 characters. If you press “Shift”, you can input the uppercase letters and numeric keys.

Keyboard Dialog

Camera Name CAM 01

Shift Back

OK Cancel

ID

Select the PTZ ID(0~99).

PTZ

In order to set the PTZ function, move the cursor to the desired channel and press the Enter( ) button. Then, select PTZ by using the  or  button. Escape from the change mode by pressing the Enter() button again.

Baudrate

Select the PTZ Speed. (4800/9600/19200/38400)

Available PTZ Lists

NO	Manufacturer	Model
1	SAMSUNG	Samsung PTZ Camera
2	TECHWIN	SPD-1600, SPD-3300

The above items should be matched with the settings of PTZ device. For more details, please refer to the manual provided by the PTZ device manufacturer.

Only the Half Duplex method is supported for transmission.

28_ menu setup