Samsung SHR-5040P/XEG, SHR-5042P/XEG, SHR-5042P/XEF, SHR-5040P/XET, SHR-5042P/XET manual Event

Recording Schedule

This function allows you to setup a recording schedule for the DVR by each camera per hour.

1 2

1. Schedule Timeline:

You can set a variety of recording mode on time of each cameras. After you select recording mode, designate scope by dragging mouse.

2. Recording Mode:

It shows a variety of recording type. Select recording type and drag it to schedule line.

Continuous: Records continuously.

Motion: Recording only when motion is detected on screen.

Alarm In: Recording only when Alarm In is activated.

EVENT

Motion Detection

This Motion Detection uses connected with recording, alarm, emergency when motion is detected.

3

09 APPENDIX

2 4 6 5 1

1. Camera:

Select channel to setup camera.

2. Motion Detection Area:

Designate scope of motion detection area to see movement of picture in camera. It will be marked green color.

Motion detection scope designation: Click mouse left button to designate the area of motion detection

Motion detection scope cancellation: Click mouse right button to cancel the area of motion detection .

3. Sensitivity:

it can set up detection level about motion detection area.

4. Use Beep:

It makes beef when movement is found in motion detection area .

5. Linked Camera:

Select camera which will connect with motion detection type camera. If motion detection type camera detect any movement, it will record with selected camera.

6. Linked Alarm Out:

Select alarm out to connect with camera which is set up motion detection.

appendix _53