Samsung SHR-5042P/CZC, SHR-5040P/XEG PTZ camera control, PTZ Camera Control Mode,  Pan,  Tilt

PTZ CAMERA CONTROL MODE

In order to enter into the PTZ device control mode, the PTZ device setup values must be properly set.

From the single screen, you can control the basic Pan, Tilt or Zoom operations, preset, camera menu and other functions. From the menu, first select the channel set

with PTZ by pressing the CH1 to CH4 buttons on the front panel and press the PTZ button. If you enter the single screen PTZ device control mode, the PTZ icon of the screen is changed from the white color to the yellow color.

06

PTZ Device

ID

0

1

2

3

Move/Control

Protocol

Samsung

PELCO-D SD GC-755 DRX-501A

Select

Baudrate 9600 9600 19200 4800

OK Cancel

Exit

Press the PTZ button in the live mode to cancel the PTZ device control mode.

If no PTZ control is used by the DVR for as long as 5 minutes, the PTZ mode is automatically cancelled. It is intended to have the PTZ control from a remote viewer during the time of no PTZ control.

PTZ CAMERA CONTROL

If PTZ has been set from the menu, the PTZ icon ( ) is displayed on the corresponding channel of the screen.

A blue bar appears on the monitor screen if you press the Enter( ) button in the live mode screen. Move to the channel with the PTZ icon by moving this bar using the direction buttons and enter the PTZ device control mode

by pressing the PTZ button. If you enter the PTZ control mode, the PTZ icon of the live screen will be changed from the white color to the yellow color. Only the basic operations of Pan, Tile and Zoom can be performed in the PTZ device control mode of the split screen.

BASIC OPERATION OF PAN, TILT & ZOOM

PAN

The PTZ camera can be controlled in the horizontal direction by using the direction ( or ) buttons on the front panel within the PTZ device control mode.