Samsung SHR-5040P/XEC, SHR-5040P/XEG, SHR-5042P/XEG, SHR-5042P/XEF manual NTP Setup,  Ddns Site

Page 41

DDNS Site

The DDNS site is selectable among SAMSUNG, DYNAMIC DDNS, NO IP and CHANGE IP.

When SAMSUNG is selected, The IP will be registered to the DDNS being operated by Samsung Electronics. DYNAMIC DDNS, NO IP and CHANGE IP are the public DDNS websites that allow registering a dynamic IP and assigning a URL free of charge. Set the host name, user ID and password after joining in the corresponding website and registering the URL.

Host Name

Sets the host name of the DDNS site.

User ID

Sets the user ID entered when joining in the DDNS site.

Password

Sets the password entered when joining in the DDNS site.

If you have set a public DDNS (dyndns.com, no- ip.com or changeip.com), it may take 30 to 60 seconds until the IP address of the host name (URL) can be updated in the DNS.

When using the network by connecting an IP router to the main system, the network port has to be designated from the setup menu of the IP router. The main system uses 1494ports (554-2048) for the TCP communication. When using it by assigning IP addresses dynamically to the main system while using the DHCP function supported by the IP router, the port number for the IP address dynamically assigned from the setup menu of the IP router needs to be designated. When using an IP router, it is recommended to designate the IP address and port number to be assigned to the main system from the setup menu of the IP router, to set a fixed IP address for the connection mode of the main system, and to enter the IP address designated to the IP router. Please refer to the IP router manual or contact the manufacturer for the IP router setup method.

NTP Setup

NTP Setup

Primary Address

pool.ntp.org

 

Secondary Address

asia.pool.ntp.org

 

Connection Status

NTP Enable

Test

 

trying.. 0%

 

 

OK

Cancel

Move/Control

Select

Exit

Primary Address & Secondary Address Sets the NTP server address.

Connection Status

You can check the connection status with the NTP server by pressing “Test” after entering the NTP server address.

If the message “Success” is displayed, the NTP server is in the state possible to communicate; if the message “Failed” is displayed, it is not possible to communicate.

NTP Enable

When using the NTP function, please check the “NTP Enable” box.

When the DVR system time prior to operating the NTP setup function is set faster than the NTP standard time (in other words, the DVR system time is set to a past time through the NTP setup), the recording function will not operate for the protection of previously recorded data. The recording function will operate normally from the point that the newly set time exceeds the original time value.

When the NTP function is in use, a time change can not be made from the time setup menu and it only allows setting the standard time zone.

The synchronization between NTP server and DVR system will be performed every hour.

05 MENU SETUP

menu setup _37

Image 41
Contents Real Time DVR WHAT’S Included with Your DVR Key features of your DVRSafety regulations Operating Temperature BatteryBefore start Standards ApprovalsContents Search and Play Appendix SHR-5040 SHR-5042 Controls on the DVRName Function When an alarm occurs, it cancels the alarm This LED indicates the status of backup operationSet up the audio On/Off function HDD, this LED repeatedly blinksDisplay the 4-split screens Time set from the system setupButton Display the 9-split screensRS-232C Real Panel JacksUsing the Numeric Buttons Remote ControlFR fast rewind FF fast forwardEnter PlayingChecking Installation Environment InstallationConnecting VIDEO, AUDIO, and Monitor Connecting with other devicesConnecting to Internet through Adsl Connecting the NetworkConnecting to Internet through Ethernet 10/100BaseT Connecting the Alarm Input Connecting the Alarm Output Connecting the USB Connecting the RS-485 DeviceLive Live Screen ModeOperating the System Live screen iconsOSD Position Control Function Live screen modesFreezing and Zooming Setting the Audio ON/OFFEvent Monitoring Function by using the Zoom buttonSPOT-OUT Monitoring Zoom functionUser Login Menu setupBefore USE SystemPassword Time/Date/Language Setup Old Password  DST Daylight Saving TimeUser Add/Del Backup item allows granting the backup setup rightGroup Authority  MenuSystem Log ProfileLog Type Log Details Description System Log ListBackup SDB-OK/FAILED Backup AVI-OK/FAILEDBackup SFX-OK/FAILED Backup JPEG-OK/FAILEDHDD Setup System Information & Setup For the DVR to recognize the update file  HDD InfoCamera  HDD END Alarm HDD END Checking HDD DataModel Camera Configuration PTZ DeviceAvailable PTZ Lists Live Mode Screen SetupMonitoring ContinueSpot Mode Event Record Record ModeVideo Full D1 Half D1 SourceAlarm Detection Setup Alarm Detection Setup Post Event  CameraVideo Loss Detection Setup Motion Detection SetupMotion Detection Setup Video Loss Detection SetupSetup BackupSymbol Record ScheduleNetwork IP SetupDdns Setup Ddns SetupIP Test  Site IPNTP Setup NTP Setup Ddns Site  Host Name Sets the host name of the Ddns site  User IDNTPNetwork Time Protocol Server List Transfer Picture SetupArea NTP Server Address USAPTZ camera control PTZ Camera Control ModeBasic Operation of PAN, Tilt & Zoom  PANPreset Setup PTZ Device Menu SetupAppears Camera Menu Setup Alarm Detection Recording will be made with the record mode setupRecording Recnormal RecordingSearch Screen Search and playSearch Date & Time Selection Date Color DescriptionSearch Channel Selection & Recording Graph Alarm In RecordingPlayback Graph Color DescriptionMode using to CH1 ~ CH4 buttons Split Screen  Play Screen Mode Split Screen Audio On/Off Single ScreenTo manually register a device Net I Setup toolAppendix Reply message Comments To modify the registered device Viewing the device-related settingsNet I Live Viewer Using layouts Storage/Cancel of Changed Information Setup menu buttonsNet I Search Viewer Before useResource Recording Event Connection AlarmObtain an IP Address Automatically Dhcp Obtain DNS Server Address AutomaticallySFX Player Date/Time SetupSFX Player Execution Date/TimeConnect WebDVR WebdvrConnect through Domain Connect through IP address ‘ff00c7’ the last 6 char of MAC Address, ‘hView panel WebDVR Main ModeScreen division button Choose between 4/6/9/10/16 screen divisionsPop-up Menu Names FeaturesPOP-UP Menu It executes Freeze feature at Live screen This button controls PTZ directions at PTZ modeIf user press Enter button, the pop-up menu will disappear VideoSHR-5040 SHR-5042 SpecificationsOutline Drawings Troubleshootingsfaq Cause Color or in abnormal shapeConnected sensors are not working ProperlyWe protect your rights with two steps Open Source License Report on the ProductPreamble Appendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method Appendix Appendix Executable Foundation How to Apply These Terms to Your New LibrariesIf you develop a new library, and you want it to License, or at your option any later versionLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’
Related manuals
Manual 78 pages 51.54 Kb Manual 78 pages 9.03 Kb Manual 78 pages 18.48 Kb Manual 78 pages 59.16 Kb Manual 78 pages 51.74 Kb Manual 78 pages 35.34 Kb

SHR-5040P, SHR-5042P, SHR-5040P/CZC, SHR-5040P/XEC, SHR-5042P/XEF specifications

Samsung's SHR-5042P/XEG, SHR-5040P/XET, SHR-5040P/XEG, SHR-5042P/XET, and SHR-5042P/XEC models are advanced surveillance solutions designed to meet the diverse needs of both residential and commercial security applications. Each unit combines cutting-edge technology, robust features, and ease of use to provide high-quality surveillance.

One of the standout features of these models is their ability to support high-definition video recording. With resolutions of up to 1080p, they ensure that users can capture clear and detailed footage, which is crucial for identifying faces and license plates in security situations. The models support multiple camera inputs, allowing users to connect various cameras for comprehensive coverage of any area.

The integration of H.264 compression technology in these DVRs significantly reduces file sizes while maintaining high image quality. This feature not only saves storage space but also facilitates quicker uploads and easier sharing of video footage, making it easier to manage recordings over extended periods.

These Samsung models come equipped with a powerful and user-friendly interface, making navigation simple for users of all skill levels. Remote access capabilities enable users to view live feeds or recorded footage from anywhere in the world via a compatible mobile device or computer. This ensures peace of mind, as users can monitor their properties in real-time.

Additionally, these models are built with durability in mind. They are designed to operate effectively under a wide range of environmental conditions, ensuring reliable performance in various settings. The SHR series also includes features such as motion detection, night vision, and continuous recording, which enhance their functionality and adaptability to different surveillance needs.

The SHR-5042P/XEG, SHR-5040P/XET, SHR-5040P/XEG, SHR-5042P/XET, and SHR-5042P/XEC DVRs are also compatible with Samsung's range of IP cameras, allowing for flexible expansion as security needs grow. Users benefit from a scalable solution that can adapt to changing requirements over time.

In summary, Samsung's SHR series represents a blend of durability, advanced technology, and user-centric design. These models are a solid choice for those seeking reliable and high-quality surveillance solutions that are easy to operate and maintain, offering peace of mind whether at home or in a business environment.