Samsung SHR-8160P, SHR-7162P, SHR-8082P manual Adding a HDD, If adding HDDs to SHR-7080, 7160, 8080

Page 16

installation

Adding a HDD

M Make sure to unplug the power cord from the wall outlet before proceeding with the installation.

Number of HDDs to install : SHR-7082/7162/8082/8162 : Default 1 HDD + Up to 4 HDDs added SHR-7080/7160/8080/8160 : Default 1 HDD + Up to 5 HDDs added

By factory default, the master unit is equipped with one HDD.

The following instructions are when you have installed the maximum number of HDDs on the master unit.

1.First, loosen the screws in the left and right sides and remove the cover.

Cover

1) If adding HDDs to SHR-7080, 7160, 8080 & 8160

M For SHR-7082/7162/8082/8162 models, see the following page.

2.Loosen the screws (x4) in the left/right and upper

sides and remove the upper and lower brackets.

Upper Bracket

Lower

Bracket

3.Install HDDs (x3) on the lower bracket and ﬁ x them with screws.

The screw (UNC 6-32) to use in the installation comes with the HDD.

Firmly secure the screw so that it can not get loose from such as vibration.

4.Install HDDs (x2) on the upper bracket and ﬁ x them with screws.

Add

Add

Add

Add

Upper Bracket

Add

Lower Bracket

Installed by default

16_ installation

Image 16

Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions  OverviewOperating temperature -20C ~ +85C Before StartNormal capacity 170mAh Continuous standard load 0.2mAPackage Contents Standards ApprovalsContents English Part Names and Functions Front Alarm RECMode Audio7080/7082 Rear Part Names and Functions Rear8080/8082 Rear 8160/8162 Rear Video OUT Audio OUTVGA HdmiRemote Control Using the numeric buttonsChannel Press each button between 1 to Changing the Remote Control ID Press any button among 1 toInstallation Checking the Installation EnvironmentRack Installation  InstallationHDD Addition  Fix the screws not to be loosened by vibrationsAdding a HDD If adding HDDs to SHR-7080, 7160, 8080If adding HDDs to SHR-7082, 7162, 8082 Signal cables Sata Cable to connectors ~ on the main boardLoosen the screws x4 in the left/right and upper ﬁ x it with screws Connecting the VIDEO, AUDIO, and Monitor Connecting the NetworkConnecting to Internet through Ethernet 10/100/1000BaseT  Connecting with OtherConnecting External Sata HDD Connecting the USBConnecting to Internet through Adsl Connecting the Alarm INPUT/OUTPUT Connecting POS Device Connecting with Other Device Connecting the RS-485 Device  Ex DVRTX+/- SCC-C6433,35RX+ DVRTX+/- SCC-C6403,07TX+Getting Started Starting the systemShutting Down the System  LiveLogin Live Screen Configuration Icons on the Live ScreenError Information Split Mode MenuSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomCurrent mode is highlighted in white View the Launcher MenuSystemDate/Time/LanguageTime. Click to display the hidden menu to the rightLive Mode Switching the screen modeSwitching the split mode Auto SequenceChannel Setting Manual Switching10-16 Auto SequenceSelecting a Spot OUT mode Switching to Single ModeSpot OUT Multichannel Live MenuAudio ON/OFF in Single mode ZoomAudio ON/OFF FreezeEvent Monitoring System Setup Setting the Date/Time/LanguageDate/Time/Language Set the Date/Time/LanguageUsing the Calendar Setting HolidayUsing the DVR Using Virtual Keyboard Setting the AdministratorPermission Management Setting the Group Setting the UserSetting Permissions SetupSystem Management Checking the System InformationBroadcastS/W Upgrade System UpgradeUpdating the Software Log Information SettingsSystem Log Setting the Device Setting the CameraCamera Event LogSetting the PTZ Screen SetupConﬁrming Devices Storage DeviceFormatting HDD Alarm Select HDD AlarmUse the up/down buttons in Device window to Move to Storage Device, and press Enter buttonRemote Devices POS DevicesRemote Device POS DeviceSetting the Monitor MonitorSetting the Screen Mode Setting the Spot OUTUsing Setting the Recording Recording ScheduleRecord Recording ScheduleQuality / Resolution Setting Standard Recording PropertiesEvent Record Duration Recording Color TagsResolution Setting Event Recording PropertiesRecord Option Setting the Event Sensor DetectionNormal Close Sensor is closed EventSetting the Motion Detection Area Alarm SetupMotion Detection Motion DetectionAlarm Schedule Video Loss DetectionBackup Setting the BackupYou can backup the desired data to a connected device BackupNetwork Configuration Connection ModeSetting the Connection You can set the network connection route and protocolSetting the Protocol Move to Connection Mode, and press EnterSelect Protocol Protocol Type Select the protocol type between TCPWhen no router is used Connecting and Setting the NetworkDynamic IP Dhcp mode When a router is used External Port Range Enter the TCP Port setTCP port can be different IP in Connection menu of the connected DVRDdns Setting Network setting window, press the up/downLive Transfer Button to move to Live Transfer and press Enter buttonSmtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingGroupAdd User Using the PTZ camera Controlling a PTZ DevicePTZ Device Getting started with PTZPreset Setting Camera SettingSearch Time SearchBackup Search Event SearchSearch & Play You can search for events by the channel and play themPOS Search Motion SearchPOS Search Motion SearchPlayback Backup RangePlay What is Web Viewer? Introducing WEB ViewerConnecting WEB Viewer  WEB ViewerWeb viewer Using Live Viewer You can change the split mode by clicking each number icon Single Mode Quad Mode Nine ModeSingle Mode Full Screen Mode 16-split mode does not support SEQUENCE, Previous and Next Channels 10~16. In Sixteen MODE, the screen is refreshedChannel DVR CH1 to CH4 CH5 to CH8 CH9 to CH12Capture Saves the current screen into a BMP or Jpeg ﬁ le Changing the Live Screen Channel Web viewer Using Search Viewer Sixteen Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Viewer Setup You can conﬁ gure the various settings of the DVR systemSystem Date/Time/LanguageHoliday Permission ManagementSystem Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule REC Quality & Resolution EventEvent Record Duration Record OptionAlarm Schedule You can set the alarm output time if a video loss occursMotion Detection Video Loss DetectionYou can check the Ddns settings NetworkConnection Live TransferMailing Service SmtpAbout SEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification PALCifs USB HDDSata HDD  AppendixSata HDD-MAX RS-232C POSProduct Overview SHR-8162Default Setting ManagementDuration Smtp Troubleshooting Retailer or the service center for more information By the service personnelOn the screen Navigate through the time barPreamble Open Source License Report on the ProductWe protect your rights with two steps On the Program is not required to print an announcement No Warranty How to Apply These Terms to Your New Programs END of Terms and ConditionsTerms and Conditions Appendix English Additional Terms Patents No Surrender of Others FreedomLimitation of Liability Revised Versions of this LicenseEND of Terms and Conditions English Is included without limitation in the term modiﬁ cation English Promoting the sharing and reuse of software generally How to Apply These Terms to Your New Libraries Copyright C year name of authorOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product

Related manuals

Manual 120 pages 9.89 Kb

Manual 120 pages 51.8 Kb

Manual 120 pages 34.81 Kb

Manual 120 pages 15.45 Kb