Samsung SHR-7082P, SHR-8160P, SHR-7162P, SHR-8082P Mailing Service, Smtp Setting, Event Setting

using the DVR

Mailing Service

You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs.

SMTP Setting
Sets the SMTP mail server.
Using the mouse may help easy setup.
3. In the <Network> setting window, press the up/down	Mailing Service
(▲▼) button to move to <Mailing Service> and press the
		SMTP	Event			Group		Recipient
[ENTER] button.
		ServerType	SMTP mail Server
4. Select <SMTP>.		Server
		Port
			11
You will see the SMTP setting window.
		Use Authentication
5. Use direction buttons (▲▼◄ ►) to move to a desired item		User
		Password
			********
and set the value.		Secure Transfer	Never/TLS
		Sender					ex. user@example.net
• Server Type : Displays the connected server type.		TEST
				OK	Cancel

•Server : Enter a server to connect to.

•Port : Sets the communication port.

•Use Authentication : Check this if the SMTP server uses user authentication. The account input box will be activated.

•User : Enter a user to use authentication when connecting to the SMTP server.

•Password : Enter the password of the SMTP server user.

•Secure Transfer : Select one from <Never/TLS> and <If Available/TLS/SSL>.

•Sender : Use the virtual keyboard to enter the sender’s e-mail address.

 Refer to “Using Virtual Keyboard”. (Page 36)

•Test : Conducts the test on the server settings.

6.When the SMTP setting is done, press <OK>.

Event Setting

You can set the interval and type of the event that will be sent to the user.

Using the mouse may help easy setup.

3.In the <Network> setting window, press the up/down

(▲▼) button to move to <Mailing Service> and press the [ENTER] button.

4.Select <Event>.

5.Use direction buttons (▲▼◄ ►) to move to a desired item and set the value.

•Event Interval : Set the event interval.

If a series of events occurs, the e-mail will be sent at the specified interval, not on each event.

Mailing Service

SMTP	Event	Group	Recipient
Event Interval	10 min
Use Event Transfer
Alarm	Motion
Change P/W	HDD Info		Video Loss
Power On/Off	Manual Record
	OK	Cancel

•Use Event Transfer : Select an event type to send if an event occurs.

If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.

6.When the event setting is done, press <OK>.

60_ using the DVR