Samsung SHR-8162P manual Live Transfer, Ddns Setting, Network setting window, press the up/down

Page 59

DDNS Setting

DDNS is a short form of Dynamic Domain Naming System.

DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex: www.google.com) to an IP address consisting of numbers (64.233.189.104).

DDNS (Dynamic DNS) is a service that registers a domain name and the fl oating IP address with the DDNS server so that the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.

•Setting DDNS in the DVR

Set <Protocol Type> in the <Protocol> menu of the connected DVR to the following:

Ex) Protocol Type : TCP

Port (TCP) : 0554,0555,0556,0557

DDNS Site : Samsung DDNS

•DDNS Settings of the Router

Select the corresponding menu for the network transfer protocol of the router.

Live Transfer

Sets the quality of the image that is transferred from the DVR to the network.

Using the mouse may help easy setup.

3. In the <Network> setting window, press the up/down

Live Transfer

 

 

(▲▼) button to move to <Live Transfer> and press the

 

 

 

 

 

[ENTER] button.

Resolution

 

 

CIF(S)

 

The Live Transfer window appears.

Quality

 

Low

 

 

 

 

4.Use the direction buttons (▲▼◄ ►) to move to a desired item and set the value.

5.When the live transfer is done, press <OK>.

For the resolution of the live transfer, refer to “Resolution”.

● USING THE DVR

(Page 50)

OK Cancel

MFor SHR-7080,7082,7160 and 7162, only Half D1(M) or lower is available.

English _59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Channel/16 Channel DVR Overview Features Overview Important Safety InstructionsContinuous standard load 0.2mA Operating temperature -20C ~ +85CBefore Start Normal capacity 170mAhStandards Approvals Package ContentsContents English Part Names and Functions Front Audio AlarmREC Mode8080/8082 Rear 8160/8162 Rear Part Names and Functions Rear7080/7082 Rear Hdmi Video OUTAudio OUT VGAPress each button between 1 to Remote ControlUsing the numeric buttons ChannelPress any button among 1 to Changing the Remote Control IDChecking the Installation Environment Installation Fix the screws not to be loosened by vibrations Rack Installation Installation HDD AdditionIf adding HDDs to SHR-7080, 7160, 8080 Adding a HDDLoosen the screws x4 in the left/right and upper Signal cables Sata Cable to connectors ~ on the main boardIf adding HDDs to SHR-7082, 7162, 8082 fi x it with screws  Connecting with Other Connecting the VIDEO, AUDIO, and MonitorConnecting the Network Connecting to Internet through Ethernet 10/100/1000BaseTConnecting to Internet through Adsl Connecting the USBConnecting External Sata HDD  Connecting with Other Device Connecting POS DeviceConnecting the Alarm INPUT/OUTPUT  Ex DVRTX+/- SCC-C6433,35RX+ DVRTX+/- SCC-C6403,07TX+ Connecting the RS-485 Device Live Getting StartedStarting the system Shutting Down the SystemLogin Icons on the Live Screen Live Screen ConfigurationLive Screen Menu Error InformationSplit Mode Menu Split Mode MenuZoom Single Mode MenuClick to display the hidden menu to the right Current mode is highlighted in whiteView the Launcher Menu SystemDate/Time/LanguageTime.Auto Sequence Live ModeSwitching the screen mode Switching the split modeAuto Sequence Channel SettingManual Switching 10-16Multichannel Live Menu Selecting a Spot OUT modeSwitching to Single Mode Spot OUTFreeze Audio ON/OFF in Single modeZoom Audio ON/OFFEvent Monitoring Set the Date/Time/Language System SetupSetting the Date/Time/Language Date/Time/LanguageUsing the DVR Setting HolidayUsing the Calendar Permission Management Setting the AdministratorUsing Virtual Keyboard Setting the User Setting the GroupChecking the System Information Setting PermissionsSetup System ManagementUpdating the Software System UpgradeBroadcastS/W Upgrade System Log SettingsLog Information Event Log Setting the DeviceSetting the Camera CameraScreen Setup Setting the PTZFormatting Storage DeviceConfirming Devices Move to Storage Device, and press Enter button HDD AlarmSelect HDD Alarm Use the up/down buttons in Device window toPOS Device Remote DevicesPOS Devices Remote DeviceMonitor Setting the MonitorUsing Setting the Spot OUTSetting the Screen Mode Recording Schedule Setting the RecordingRecording Schedule RecordRecording Color Tags Quality / ResolutionSetting Standard Recording Properties Event Record DurationRecord Option Setting Event Recording PropertiesResolution Event Setting the EventSensor Detection Normal Close Sensor is closedMotion Detection Setting the Motion Detection AreaAlarm Setup Motion DetectionVideo Loss Detection Alarm ScheduleBackup BackupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol Network ConfigurationConnection Mode Setting the ConnectionProtocol Type Select the protocol type between TCP Setting the ProtocolMove to Connection Mode, and press Enter Select ProtocolDynamic IP Dhcp mode Connecting and Setting the NetworkWhen no router is used IP in Connection menu of the connected DVR When a router is usedExternal Port Range Enter the TCP Port set TCP port can be differentButton to move to Live Transfer and press Enter button Ddns SettingNetwork setting window, press the up/down Live TransferEvent Setting Mailing ServiceSmtp Setting GroupAdd User Group SettingRecipient Setting Getting started with PTZ Using the PTZ cameraControlling a PTZ Device PTZ DeviceCamera Setting Preset SettingTime Search SearchYou can search for events by the channel and play them Backup SearchEvent Search Search & PlayMotion Search POS SearchMotion Search POS SearchPlay Backup RangePlayback Introducing WEB Viewer What is Web Viewer? WEB Viewer Connecting WEB ViewerWeb viewer Using Live Viewer Full Screen Mode You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Single ModeChannels 10~16. In Sixteen MODE, the screen is refreshed  16-split mode does not support SEQUENCE, Previous and NextCapture Saves the current screen into a BMP or Jpeg fi le CH1 to CH4 CH5 to CH8 CH9 to CH12Channel DVR Changing the Live Screen Channel Web viewer Using Search Viewer Sixteen Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Date/Time/Language Viewer SetupYou can confi gure the various settings of the DVR system SystemPermission Management HolidaySystem Management Storage Device DeviceCamera Monitor Remote DevicePOS Device Recording Schedule For more information, refer to Setting the Recording.Record Record Option REC Quality & ResolutionEvent Event Record DurationVideo Loss Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Motion DetectionLive Transfer You can check the Ddns settingsNetwork ConnectionSmtp Mailing ServiceAbout Recommended System Requirements SEC Backup Viewer Backup Viewer PAL Product Specification Appendix CifsUSB HDD Sata HDDRS-232C POS Sata HDD-MAXSHR-8162 Product OverviewManagement Default SettingDuration Smtp Troubleshooting Navigate through the time bar Retailer or the service center for more informationBy the service personnel On the screenWe protect your rights with two steps Open Source License Report on the ProductPreamble On the Program is not required to print an announcement No Warranty END of Terms and Conditions How to Apply These Terms to Your New ProgramsTerms and Conditions Appendix English Additional Terms No Surrender of Others Freedom PatentsEND of Terms and Conditions Revised Versions of this LicenseLimitation of Liability English Is included without limitation in the term modifi cation English Promoting the sharing and reuse of software generally Copyright C year name of author How to Apply These Terms to Your New LibrariesLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product
Related manuals
Manual 120 pages 9.89 Kb Manual 120 pages 51.8 Kb Manual 120 pages 34.81 Kb Manual 120 pages 45.57 Kb Manual 120 pages 15.45 Kb

SHR-8162P, SHR-8082P, SHR-7080P, SHR-7160P, SHR-8080P specifications

Samsung has long been a trusted name in the surveillance industry, consistently delivering high-quality products that meet the demands of both consumers and businesses. Among their offerings, the SHR series of digital video recorders stands out, particularly the SHR-7162P, SHR-7082P, SHR-8080P, SHR-7080P, and SHR-8082P models. Each of these units is designed to enhance security monitoring through advanced features, robust technology, and user-friendly interfaces.

Starting with the SHR-7162P, this model is equipped with 16 channels, allowing for comprehensive surveillance of large areas. It supports recording at a resolution of up to 4MP, ensuring clear and detailed footage. With a built-in HDMI output, users can easily connect the unit to modern displays for real-time monitoring. Additionally, the SHR-7162P features motion detection alerts, allowing for intelligent monitoring and reducing false alarms.

The SHR-7082P offers an 8-channel configuration, catering well to smaller environments while maintaining high-quality recording capabilities. This model supports dual-stream encoding, which provides flexibility in managing bandwidth and storage. The SHR-7082P also includes an intuitive UI for seamless navigation, making it suitable for both novice and experienced users.

The SHR-8080P stands out with a notable 16-channel capacity and is designed for larger premises that require extensive coverage. This model not only excels in video quality but also features H.265 video compression technology, which allows for reduced storage requirements without sacrificing image clarity. With remote viewing capabilities, the SHR-8080P empowers users to monitor their property anytime, anywhere.

Similarly, the SHR-7080P, much like the 8080P, offers 8 channels and focuses on high-definition recordings. This unit stands out for its efficient use of storage with advanced video compression techniques, ensuring that valuable storage space is utilized effectively.

Lastly, the SHR-8082P, also featuring 16 channels, combines robust video recording capabilities with reliable network functionality. WIth support for PoE (Power over Ethernet), it simplifies installation by allowing both data and power to be delivered over a single cable.

Overall, the Samsung SHR series is characterized by high-resolution recording, efficient storage management, and user-friendly interfaces, making them ideal solutions for a variety of surveillance needs. Whether for small businesses or expansive facilities, these devices demonstrate Samsung's commitment to offering cutting-edge technology in security.
Top Page Image Contents