Samsung SHR-8082P, SHR-8160P, SHR-7162P, SHR-8162P, SHR-7082P, SHR-7080P, SHR-7160P ﬁ x it with screws

Page 18

installation

3.Install a HDD (x1) on the lower bracket and ﬁ x it with screws.

4.Install HDDs (x3) on the upper bracket and ﬁ x them with screws.

Add

Upper Bracket

Add

Lower Bracket

Installed by default

5.When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and ﬁ x them with the provided screws.

6.When the installation of additional HDDs is done, connect the power cable and connect the HDD data cables (SATA Cable) to connectors ~ on the main board.

Note that the number of a HDD data calbe is nothing to do with operation of the HDD. Just make arrangements of the connectors considering the length of each connector.

Upper Bracket

Lower

Bracket

7.Check if the connectors are properly connected and there is no problem with wiring, and close the cover

and ﬁ x it with screws.

Cover

18_ installation

Image 18

Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions  OverviewNormal capacity 170mAh Operating temperature -20C ~ +85CBefore Start Continuous standard load 0.2mAPackage Contents Standards ApprovalsContents English Part Names and Functions Front Mode AlarmREC AudioPart Names and Functions Rear 7080/7082 Rear8080/8082 Rear 8160/8162 Rear VGA Video OUTAudio OUT HdmiChannel Remote ControlUsing the numeric buttons Press each button between 1 toChanging the Remote Control ID Press any button among 1 toInstallation Checking the Installation EnvironmentHDD Addition Rack Installation Installation  Fix the screws not to be loosened by vibrationsAdding a HDD If adding HDDs to SHR-7080, 7160, 8080Signal cables Sata Cable to connectors ~ on the main board If adding HDDs to SHR-7082, 7162, 8082Loosen the screws x4 in the left/right and upper ﬁ x it with screws Connecting to Internet through Ethernet 10/100/1000BaseT Connecting the VIDEO, AUDIO, and MonitorConnecting the Network  Connecting with OtherConnecting the USB Connecting External Sata HDDConnecting to Internet through Adsl Connecting POS Device Connecting the Alarm INPUT/OUTPUT Connecting with Other Device Connecting the RS-485 Device  Ex DVRTX+/- SCC-C6433,35RX+ DVRTX+/- SCC-C6403,07TX+Shutting Down the System Getting StartedStarting the system  LiveLogin Live Screen Configuration Icons on the Live ScreenSplit Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomSystemDate/Time/LanguageTime. Current mode is highlighted in whiteView the Launcher Menu Click to display the hidden menu to the rightSwitching the split mode Live ModeSwitching the screen mode Auto Sequence10-16 Channel SettingManual Switching Auto SequenceSpot OUT Selecting a Spot OUT modeSwitching to Single Mode Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeZoom FreezeEvent Monitoring Date/Time/Language System SetupSetting the Date/Time/Language Set the Date/Time/LanguageSetting Holiday Using the CalendarUsing the DVR Setting the Administrator Using Virtual KeyboardPermission Management Setting the Group Setting the UserSystem Management Setting PermissionsSetup Checking the System InformationSystem Upgrade BroadcastS/W UpgradeUpdating the Software Settings Log InformationSystem Log Camera Setting the DeviceSetting the Camera Event LogSetting the PTZ Screen SetupStorage Device Conﬁrming DevicesFormatting Use the up/down buttons in Device window to HDD AlarmSelect HDD Alarm Move to Storage Device, and press Enter buttonRemote Device Remote DevicesPOS Devices POS DeviceSetting the Monitor MonitorSetting the Spot OUT Setting the Screen ModeUsing Record Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration Quality / ResolutionSetting Standard Recording Properties Recording Color TagsSetting Event Recording Properties ResolutionRecord Option Normal Close Sensor is closed Setting the EventSensor Detection EventMotion Detection Setting the Motion Detection AreaAlarm Setup Motion DetectionAlarm Schedule Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSelect Protocol Setting the ProtocolMove to Connection Mode, and press Enter Protocol Type Select the protocol type between TCPConnecting and Setting the Network When no router is usedDynamic IP Dhcp mode TCP port can be different When a router is usedExternal Port Range Enter the TCP Port set IP in Connection menu of the connected DVRLive Transfer Ddns SettingNetwork setting window, press the up/down Button to move to Live Transfer and press Enter buttonMailing Service Smtp SettingEvent Setting Group Setting Recipient SettingGroupAdd User PTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZPreset Setting Camera SettingSearch Time SearchSearch & Play Backup SearchEvent Search You can search for events by the channel and play themPOS Search POS SearchMotion Search Motion SearchBackup Range PlaybackPlay What is Web Viewer? Introducing WEB ViewerConnecting WEB Viewer  WEB ViewerWeb viewer Using Live Viewer Single Mode You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Full Screen Mode 16-split mode does not support SEQUENCE, Previous and Next Channels 10~16. In Sixteen MODE, the screen is refreshedCH1 to CH4 CH5 to CH8 CH9 to CH12 Channel DVRCapture Saves the current screen into a BMP or Jpeg ﬁ le Changing the Live Screen Channel Web viewer Using Search Viewer Sixteen Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar System Viewer SetupYou can conﬁ gure the various settings of the DVR system Date/Time/LanguageHoliday Permission ManagementSystem Management Device CameraStorage Device Remote Device POS DeviceMonitor For more information, refer to Setting the Recording. RecordRecording Schedule Event Record Duration REC Quality & ResolutionEvent Record OptionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionConnection You can check the Ddns settingsNetwork Live TransferMailing Service SmtpAbout SEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification PALSata HDD CifsUSB HDD  AppendixSata HDD-MAX RS-232C POSProduct Overview SHR-8162Default Setting ManagementDuration Smtp Troubleshooting On the screen Retailer or the service center for more informationBy the service personnel Navigate through the time barOpen Source License Report on the Product PreambleWe protect your rights with two steps On the Program is not required to print an announcement No Warranty How to Apply These Terms to Your New Programs END of Terms and ConditionsTerms and Conditions Appendix English Additional Terms Patents No Surrender of Others FreedomRevised Versions of this License Limitation of LiabilityEND of Terms and Conditions English Is included without limitation in the term modiﬁ cation English Promoting the sharing and reuse of software generally How to Apply These Terms to Your New Libraries Copyright C year name of authorOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product

Related manuals

Manual 120 pages 9.89 Kb

Manual 120 pages 51.8 Kb

Manual 120 pages 34.81 Kb

Manual 120 pages 45.57 Kb

Manual 120 pages 15.45 Kb

SHR-8162P, SHR-8082P, SHR-7080P, SHR-7160P, SHR-8080P specifications

Samsung has long been a trusted name in the surveillance industry, consistently delivering high-quality products that meet the demands of both consumers and businesses. Among their offerings, the SHR series of digital video recorders stands out, particularly the SHR-7162P, SHR-7082P, SHR-8080P, SHR-7080P, and SHR-8082P models. Each of these units is designed to enhance security monitoring through advanced features, robust technology, and user-friendly interfaces.

Starting with the SHR-7162P, this model is equipped with 16 channels, allowing for comprehensive surveillance of large areas. It supports recording at a resolution of up to 4MP, ensuring clear and detailed footage. With a built-in HDMI output, users can easily connect the unit to modern displays for real-time monitoring. Additionally, the SHR-7162P features motion detection alerts, allowing for intelligent monitoring and reducing false alarms.

The SHR-7082P offers an 8-channel configuration, catering well to smaller environments while maintaining high-quality recording capabilities. This model supports dual-stream encoding, which provides flexibility in managing bandwidth and storage. The SHR-7082P also includes an intuitive UI for seamless navigation, making it suitable for both novice and experienced users.

The SHR-8080P stands out with a notable 16-channel capacity and is designed for larger premises that require extensive coverage. This model not only excels in video quality but also features H.265 video compression technology, which allows for reduced storage requirements without sacrificing image clarity. With remote viewing capabilities, the SHR-8080P empowers users to monitor their property anytime, anywhere.

Similarly, the SHR-7080P, much like the 8080P, offers 8 channels and focuses on high-definition recordings. This unit stands out for its efficient use of storage with advanced video compression techniques, ensuring that valuable storage space is utilized effectively.

Lastly, the SHR-8082P, also featuring 16 channels, combines robust video recording capabilities with reliable network functionality. WIth support for PoE (Power over Ethernet), it simplifies installation by allowing both data and power to be delivered over a single cable.

Overall, the Samsung SHR series is characterized by high-resolution recording, efficient storage management, and user-friendly interfaces, making them ideal solutions for a variety of surveillance needs. Whether for small businesses or expansive facilities, these devices demonstrate Samsung's commitment to offering cutting-edge technology in security.