Samsung SHR-8082P, SHR-8160P When a router is used, External Port Range Enter the TCP Port set

Page 58

using the DVR

When a router is used

JTo avoid IP address conflict with the DVR's static IP, check followings:

Setting the DVR with a static IP

-Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Area Network (LAN) environment.

Setting the DVR Network

1.Set the <Connection Mode> in <Connection> menu of the connected DVR to <Static IP>.

2.Check whether the set IP address is in the static IP range provided by the IP router. IP, Gateway, and Subnet Mask : Consult your network manager.

Check whether the set IP address is in the static IP range provided by the IP router.

JIf a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you should set the IP address out of the configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~ 192.168.0.254).

3.Check the Gateway address and subnet mask are equal to those set in the IP router.

Setting the DHCP IP Address of the IP router

1.To access the IP router’s confi gurations, open a web browser on the local PC that is connected to the IP router and enter the router’s address (ex: http://192.168.1.1).

2.At this stage, make the local PC's windows network confi gurations to the below example: Ex) IP : 192.168.1.2

Subnet mask : 255.255.255.0

Gateway : 192.168.1.1

-Once connected to the IP router, it prompts with password. While entering nothing to the User Name fi eld, enter “admin” into the password fi eld and press <OK> to access the router confi gurations.

-Access the router’s DHCP confi guration menu and set its DHCP server activation, and provide the start and end address.

Set the start address (192.168.0.100) and end address (192.168.0.200).

MAbove steps may differ from the router devices depending on the manufacturer.

Setting Router’s Port Forwarding

1.

Set the protocol to <TCP>.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection Mode

 

 

 

 

 

 

2.

External Port Range : Enter the TCP Port set in the

 

 

Connection

Protocol

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<Port (TCP)> in <Protocol> menu of the connected DVR.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Protocol Type

 

TCP

 

 

 

 

 

 

 

 

If more than one DVRs are connected to the router, the

 

 

Port(TCP)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

554 ~ 557

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TCP port can be different.

 

 

Port(UDP)

 

8000 ~ 8159

 

 

 

 

 

 

 

 

 

Unicast/Multicast

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unicast

 

 

 

 

 

 

 

 

 

 

Multicast IP

 

 

 

 

 

 

 

 

 

 

 

 

224.126. 63.

1

 

 

 

 

3.

Internal PC IP Address : Enter the IP address set to the

 

 

TTL

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<IP> in <Connection> menu of the connected DVR.

 

 

Webviewer Port

 

80

 

 

 

 

 

 

 

 

4.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Internal Port Range : Set the same to the “External Port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

Cancel

 

 

Range”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAbove steps may differ from the router devices depending on the manufacturer.

Port forwarding is required when you want to access the DVR connected to the router from outside of the router’s network.

58_ using the DVR

Image 58
Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions  OverviewNormal capacity 170mAh Operating temperature -20C ~ +85CBefore Start Continuous standard load 0.2mAPackage Contents Standards ApprovalsContents English Part Names and Functions Front Mode AlarmREC Audio7080/7082 Rear Part Names and Functions Rear8080/8082 Rear 8160/8162 Rear VGA Video OUTAudio OUT HdmiChannel Remote ControlUsing the numeric buttons Press each button between 1 toChanging the Remote Control ID Press any button among 1 toInstallation Checking the Installation EnvironmentHDD Addition Rack Installation Installation  Fix the screws not to be loosened by vibrationsAdding a HDD If adding HDDs to SHR-7080, 7160, 8080If adding HDDs to SHR-7082, 7162, 8082 Signal cables Sata Cable to connectors ~ on the main boardLoosen the screws x4 in the left/right and upper fi x it with screws Connecting to Internet through Ethernet 10/100/1000BaseT Connecting the VIDEO, AUDIO, and MonitorConnecting the Network  Connecting with OtherConnecting External Sata HDD Connecting the USBConnecting to Internet through Adsl Connecting the Alarm INPUT/OUTPUT Connecting POS Device Connecting with Other Device Connecting the RS-485 Device  Ex DVRTX+/- SCC-C6433,35RX+ DVRTX+/- SCC-C6403,07TX+Shutting Down the System Getting StartedStarting the system  LiveLogin Live Screen Configuration Icons on the Live ScreenSplit Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomSystemDate/Time/LanguageTime. Current mode is highlighted in whiteView the Launcher Menu Click to display the hidden menu to the rightSwitching the split mode Live ModeSwitching the screen mode Auto Sequence10-16 Channel SettingManual Switching Auto SequenceSpot OUT Selecting a Spot OUT modeSwitching to Single Mode Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeZoom FreezeEvent Monitoring Date/Time/Language System SetupSetting the Date/Time/Language Set the Date/Time/LanguageUsing the Calendar Setting HolidayUsing the DVR Using Virtual Keyboard Setting the AdministratorPermission Management Setting the Group Setting the UserSystem Management Setting PermissionsSetup Checking the System InformationBroadcastS/W Upgrade System UpgradeUpdating the Software Log Information SettingsSystem Log Camera Setting the DeviceSetting the Camera Event LogSetting the PTZ Screen SetupConfirming Devices Storage DeviceFormatting Use the up/down buttons in Device window to HDD AlarmSelect HDD Alarm Move to Storage Device, and press Enter buttonRemote Device Remote DevicesPOS Devices POS DeviceSetting the Monitor MonitorSetting the Screen Mode Setting the Spot OUTUsing Record Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration Quality / ResolutionSetting Standard Recording Properties Recording Color TagsResolution Setting Event Recording PropertiesRecord Option Normal Close Sensor is closed Setting the EventSensor Detection EventMotion Detection Setting the Motion Detection AreaAlarm Setup Motion DetectionAlarm Schedule Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSelect Protocol Setting the ProtocolMove to Connection Mode, and press Enter Protocol Type Select the protocol type between TCPWhen no router is used Connecting and Setting the NetworkDynamic IP Dhcp mode TCP port can be different When a router is usedExternal Port Range Enter the TCP Port set IP in Connection menu of the connected DVRLive Transfer Ddns SettingNetwork setting window, press the up/down Button to move to Live Transfer and press Enter buttonSmtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingGroupAdd User PTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZPreset Setting Camera SettingSearch Time SearchSearch & Play Backup SearchEvent Search You can search for events by the channel and play themPOS Search POS SearchMotion Search Motion SearchPlayback Backup RangePlay What is Web Viewer? Introducing WEB ViewerConnecting WEB Viewer  WEB ViewerWeb viewer Using Live Viewer Single Mode You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Full Screen Mode 16-split mode does not support SEQUENCE, Previous and Next Channels 10~16. In Sixteen MODE, the screen is refreshedChannel DVR CH1 to CH4 CH5 to CH8 CH9 to CH12Capture Saves the current screen into a BMP or Jpeg fi le Changing the Live Screen Channel Web viewer Using Search Viewer Sixteen Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar System Viewer SetupYou can confi gure the various settings of the DVR system Date/Time/LanguageHoliday Permission ManagementSystem Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule Event Record Duration REC Quality & ResolutionEvent Record OptionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionConnection You can check the Ddns settingsNetwork Live TransferMailing Service SmtpAbout SEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification PALSata HDD CifsUSB HDD  AppendixSata HDD-MAX RS-232C POSProduct Overview SHR-8162Default Setting ManagementDuration Smtp Troubleshooting On the screen Retailer or the service center for more informationBy the service personnel Navigate through the time barPreamble Open Source License Report on the ProductWe protect your rights with two steps On the Program is not required to print an announcement No Warranty How to Apply These Terms to Your New Programs END of Terms and ConditionsTerms and Conditions Appendix English Additional Terms Patents No Surrender of Others FreedomLimitation of Liability Revised Versions of this LicenseEND of Terms and Conditions English Is included without limitation in the term modifi cation English Promoting the sharing and reuse of software generally How to Apply These Terms to Your New Libraries Copyright C year name of authorOpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product
Related manuals
Manual 120 pages 9.89 Kb Manual 120 pages 51.8 Kb Manual 120 pages 34.81 Kb Manual 120 pages 45.57 Kb Manual 120 pages 15.45 Kb

SHR-8162P, SHR-8082P, SHR-7080P, SHR-7160P, SHR-8080P specifications

Samsung has long been a trusted name in the surveillance industry, consistently delivering high-quality products that meet the demands of both consumers and businesses. Among their offerings, the SHR series of digital video recorders stands out, particularly the SHR-7162P, SHR-7082P, SHR-8080P, SHR-7080P, and SHR-8082P models. Each of these units is designed to enhance security monitoring through advanced features, robust technology, and user-friendly interfaces.

Starting with the SHR-7162P, this model is equipped with 16 channels, allowing for comprehensive surveillance of large areas. It supports recording at a resolution of up to 4MP, ensuring clear and detailed footage. With a built-in HDMI output, users can easily connect the unit to modern displays for real-time monitoring. Additionally, the SHR-7162P features motion detection alerts, allowing for intelligent monitoring and reducing false alarms.

The SHR-7082P offers an 8-channel configuration, catering well to smaller environments while maintaining high-quality recording capabilities. This model supports dual-stream encoding, which provides flexibility in managing bandwidth and storage. The SHR-7082P also includes an intuitive UI for seamless navigation, making it suitable for both novice and experienced users.

The SHR-8080P stands out with a notable 16-channel capacity and is designed for larger premises that require extensive coverage. This model not only excels in video quality but also features H.265 video compression technology, which allows for reduced storage requirements without sacrificing image clarity. With remote viewing capabilities, the SHR-8080P empowers users to monitor their property anytime, anywhere.

Similarly, the SHR-7080P, much like the 8080P, offers 8 channels and focuses on high-definition recordings. This unit stands out for its efficient use of storage with advanced video compression techniques, ensuring that valuable storage space is utilized effectively.

Lastly, the SHR-8082P, also featuring 16 channels, combines robust video recording capabilities with reliable network functionality. WIth support for PoE (Power over Ethernet), it simplifies installation by allowing both data and power to be delivered over a single cable.

Overall, the Samsung SHR series is characterized by high-resolution recording, efficient storage management, and user-friendly interfaces, making them ideal solutions for a variety of surveillance needs. Whether for small businesses or expansive facilities, these devices demonstrate Samsung's commitment to offering cutting-edge technology in security.