Samsung SHR-7162P, SHR-8160P manual  16-split mode does not support SEQUENCE, Previous and Next

Page 73

CONNECTED DVR

This displays the IP address and the status of the connecting DVR.

MConnection failure message

No Response : Appears when the DVR does not respond.

Collision : Appears when Admin mode is already in use or simultaneous access to the same DVR from another PC.

Access Denied : Appears when the maximum number of users is exceeded.

The number of simultaneous connections are limited to 5.

CHANGING THE LIVE SCREEN MODE

16-split mode does not support “SEQUENCE”, “PREVIOUS” and “NEXT”.

SEQUENCE: When this button is clicked, screens are switched at a preset interval. In SINGLE MODE, the channel numbers are sequentially switched from 1 to 16. In QUAD MODE, the screens are changed like 1st

4 channels (1~4) 2nd 4 channels(5~8) 3rd 4 channels(9~12) 4th 4 channels (13~16). In NINE MODE, the screens are changed from

9 channels (1~9) to 7 channels (10~16). In SIXTEEN MODE, the screen refreshes at the preset interval

Preset interval (10 seconds)

PREVIOUS: When this button is clicked, the previous screen appears. In SINGLE MODE, the channel numbers are switched in reverse order. In QUAD MODE, the screens are changed like 1st 4 channels (1~4)

2nd 4 channels (13~16) 3rd 4 channels (9~12) 4th 4 channels (5~8). In NINE MODE, the screens are changed from 9 channels (1~9) to

7 channels (10~16). In SIXTEEN MODE, the screen is refreshed.

WEB VIEWER

English _73

Image 73
Contents Channel/16 Channel DVR Overview Features Overview Important Safety InstructionsBefore Start Operating temperature -20C ~ +85CNormal capacity 170mAh Continuous standard load 0.2mAStandards Approvals Package ContentsContents English Part Names and Functions Front REC AlarmMode Audio7080/7082 Rear Part Names and Functions Rear8080/8082 Rear 8160/8162 Rear Audio OUT Video OUTVGA HdmiUsing the numeric buttons Remote ControlChannel Press each button between 1 toPress any button among 1 to Changing the Remote Control IDChecking the Installation Environment Installation Installation Rack InstallationHDD Addition  Fix the screws not to be loosened by vibrationsIf adding HDDs to SHR-7080, 7160, 8080 Adding a HDDIf adding HDDs to SHR-7082, 7162, 8082 Signal cables Sata Cable to connectors ~ on the main boardLoosen the screws x4 in the left/right and upper fi x it with screws Connecting the Network Connecting the VIDEO, AUDIO, and MonitorConnecting to Internet through Ethernet 10/100/1000BaseT  Connecting with OtherConnecting External Sata HDD Connecting the USBConnecting to Internet through Adsl Connecting the Alarm INPUT/OUTPUT Connecting POS Device Connecting with Other Device  Ex DVRTX+/- SCC-C6433,35RX+ DVRTX+/- SCC-C6403,07TX+ Connecting the RS-485 DeviceStarting the system Getting StartedShutting Down the System  LiveLogin Icons on the Live Screen Live Screen ConfigurationSplit Mode Menu Error InformationSplit Mode Menu Live Screen MenuZoom Single Mode MenuView the Launcher Menu Current mode is highlighted in whiteSystemDate/Time/LanguageTime. Click to display the hidden menu to the rightSwitching the screen mode Live ModeSwitching the split mode Auto SequenceManual Switching Channel Setting10-16 Auto SequenceSwitching to Single Mode Selecting a Spot OUT modeSpot OUT Multichannel Live MenuZoom Audio ON/OFF in Single modeAudio ON/OFF FreezeEvent Monitoring Setting the Date/Time/Language System SetupDate/Time/Language Set the Date/Time/LanguageUsing the Calendar Setting HolidayUsing the DVR Using Virtual Keyboard Setting the AdministratorPermission Management Setting the User Setting the GroupSetup Setting PermissionsSystem Management Checking the System InformationBroadcastS/W Upgrade System UpgradeUpdating the Software Log Information SettingsSystem Log Setting the Camera Setting the DeviceCamera Event LogScreen Setup Setting the PTZConfirming Devices Storage DeviceFormatting Select HDD Alarm HDD AlarmUse the up/down buttons in Device window to Move to Storage Device, and press Enter buttonPOS Devices Remote DevicesRemote Device POS DeviceMonitor Setting the MonitorSetting the Screen Mode Setting the Spot OUTUsing Recording Schedule Setting the RecordingRecord Recording ScheduleSetting Standard Recording Properties Quality / ResolutionEvent Record Duration Recording Color TagsResolution Setting Event Recording PropertiesRecord Option Sensor Detection Setting the EventNormal Close Sensor is closed EventAlarm Setup Setting the Motion Detection AreaMotion Detection Motion DetectionVideo Loss Detection Alarm ScheduleSetting the Backup BackupYou can backup the desired data to a connected device BackupConnection Mode Network ConfigurationSetting the Connection You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolSelect Protocol Protocol Type Select the protocol type between TCPWhen no router is used Connecting and Setting the NetworkDynamic IP Dhcp mode External Port Range Enter the TCP Port set When a router is usedTCP port can be different IP in Connection menu of the connected DVRNetwork setting window, press the up/down Ddns SettingLive Transfer Button to move to Live Transfer and press Enter buttonSmtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingGroupAdd User Controlling a PTZ Device Using the PTZ cameraPTZ Device Getting started with PTZCamera Setting Preset SettingTime Search SearchEvent Search Backup SearchSearch & Play You can search for events by the channel and play themMotion Search POS SearchPOS Search Motion SearchPlayback Backup RangePlay Introducing WEB Viewer What is Web Viewer? WEB Viewer Connecting WEB ViewerWeb viewer Using Live Viewer Single Mode Quad Mode Nine Mode You can change the split mode by clicking each number iconSingle Mode Full Screen ModeChannels 10~16. In Sixteen MODE, the screen is refreshed  16-split mode does not support SEQUENCE, Previous and NextChannel DVR CH1 to CH4 CH5 to CH8 CH9 to CH12Capture Saves the current screen into a BMP or Jpeg fi le Changing the Live Screen Channel Web viewer Using Search Viewer Sixteen Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar You can confi gure the various settings of the DVR system Viewer SetupSystem Date/Time/LanguagePermission Management HolidaySystem Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule Event REC Quality & ResolutionEvent Record Duration Record OptionYou can set the alarm output time if a video loss occurs Alarm ScheduleMotion Detection Video Loss DetectionNetwork You can check the Ddns settingsConnection Live TransferSmtp Mailing ServiceAbout Recommended System Requirements SEC Backup Viewer Backup Viewer PAL Product SpecificationUSB HDD CifsSata HDD  AppendixRS-232C POS Sata HDD-MAXSHR-8162 Product OverviewManagement Default SettingDuration Smtp Troubleshooting By the service personnel Retailer or the service center for more informationOn the screen Navigate through the time barPreamble Open Source License Report on the ProductWe protect your rights with two steps On the Program is not required to print an announcement No Warranty END of Terms and Conditions How to Apply These Terms to Your New ProgramsTerms and Conditions Appendix English Additional Terms No Surrender of Others Freedom PatentsLimitation of Liability Revised Versions of this LicenseEND of Terms and Conditions English Is included without limitation in the term modifi cation English Promoting the sharing and reuse of software generally Copyright C year name of author How to Apply These Terms to Your New LibrariesLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product
Related manuals
Manual 120 pages 9.89 Kb Manual 120 pages 51.8 Kb Manual 120 pages 34.81 Kb Manual 120 pages 45.57 Kb Manual 120 pages 15.45 Kb

SHR-8162P, SHR-8082P, SHR-7080P, SHR-7160P, SHR-8080P specifications

Samsung has long been a trusted name in the surveillance industry, consistently delivering high-quality products that meet the demands of both consumers and businesses. Among their offerings, the SHR series of digital video recorders stands out, particularly the SHR-7162P, SHR-7082P, SHR-8080P, SHR-7080P, and SHR-8082P models. Each of these units is designed to enhance security monitoring through advanced features, robust technology, and user-friendly interfaces.

Starting with the SHR-7162P, this model is equipped with 16 channels, allowing for comprehensive surveillance of large areas. It supports recording at a resolution of up to 4MP, ensuring clear and detailed footage. With a built-in HDMI output, users can easily connect the unit to modern displays for real-time monitoring. Additionally, the SHR-7162P features motion detection alerts, allowing for intelligent monitoring and reducing false alarms.

The SHR-7082P offers an 8-channel configuration, catering well to smaller environments while maintaining high-quality recording capabilities. This model supports dual-stream encoding, which provides flexibility in managing bandwidth and storage. The SHR-7082P also includes an intuitive UI for seamless navigation, making it suitable for both novice and experienced users.

The SHR-8080P stands out with a notable 16-channel capacity and is designed for larger premises that require extensive coverage. This model not only excels in video quality but also features H.265 video compression technology, which allows for reduced storage requirements without sacrificing image clarity. With remote viewing capabilities, the SHR-8080P empowers users to monitor their property anytime, anywhere.

Similarly, the SHR-7080P, much like the 8080P, offers 8 channels and focuses on high-definition recordings. This unit stands out for its efficient use of storage with advanced video compression techniques, ensuring that valuable storage space is utilized effectively.

Lastly, the SHR-8082P, also featuring 16 channels, combines robust video recording capabilities with reliable network functionality. WIth support for PoE (Power over Ethernet), it simplifies installation by allowing both data and power to be delivered over a single cable.

Overall, the Samsung SHR series is characterized by high-resolution recording, efficient storage management, and user-friendly interfaces, making them ideal solutions for a variety of surveillance needs. Whether for small businesses or expansive facilities, these devices demonstrate Samsung's commitment to offering cutting-edge technology in security.