Samsung HW-K335/ZF, HW-K335/ZG manual Centre Line, Wall Mount R Wall Mount L · 11 · English

2.Align the Paper Template's Centre Line with the centre of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape.

cIf you are not mounting below a TV, place the Centre Line in the centre of the installation area.

A	B	CENTER LINE	A-TYPE : 616mm	B	A
			B-TYPE : 360mm

Centre Line

3.Push a pen tip or sharpened pencil tip through the centre of the B-TYPE images on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide.

4.Using an appropriately sized drill bit, drill a hole in the wall at each marking.

cIf the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the holes you drill are large enough for the anchors or mollies you use.

5.Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support screw hole.

6.Use the two Screws (M4 x L12) to attach both Bracket-Wall Mount L and R to the Soundbar's bottom. For a proper fit, make sure to align the bumps on the Soundbar to the holes on the brackets.

●When assembling, make sure the hanger part of the Bracket-Wall Mounts faces backwards.

Rear Side of Soundbar

Right end of Soundbar

●The left and right mounts are different shapes. Make sure to position them correctly.

Wall Mount R Wall Mount L

· 11 · English