Installation Instructions for Stacking
GB
Important
1Disconnect the power cord from the wall socket before attempting installation.
2For stacking installation, you must use the “bracket plate” which is enclosed with this unit.
3The maximum stacking height is two units.
➢Stacking the two units is limited to the following models. CM1219/1229.
CAUTION: Be sure the oven cavity is empty.
Installation
1Stack two units together.
2Remove the 6 screws as shown in the figure.
3Place the
4Attach and tighten the 6 screws again.
5Ensure the top oven is at a safe and workable height.
Screws
Bracket - plate
17