Samsung LH55WMHPTWC/EN Automatic Open Network Settings Wired, Manual Open Network Settings Wired

Page 16

Set the network connection to use Internet services such as perform software upgrades.

Automatic Open Network Settings (Wired)

Connect to the network using a LAN cable.

Make sure a LAN cable is connected first.

How to set up automatically

1Set Network Type to Wireless from the Open Network Settings page.

2The network test screen appears and verifies the network connection.

When the connection has been verified, the “Success! Your device is connected to the

Internet. If you have any problems using online services, please contact your Internet service provider.” message appears.

"" If the connection process fails, check the LAN port connection.

"" If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, network setup.

Manual Open Network Settings (Wired)

Offices may use static IP addresses.

If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.

Getting the Network Connection Values

To view the Network connection values on most Windows computers, follow these steps.

1Right click the Network icon on the bottom right of the screen.

2In the pop-up menu that appears, click Status.

3On the dialog that appears, click the Support tab.

4On the Support Tab, click the Details button. The Network connection values are displayed.

How to set up manually

1Set Network Type to Wireless from the Open Network Settings page.

2The network test screen appears and the verification process starts. Press Cancel. The verification process stops.

3Select IP Settings on network connection screen. The IP Settings screen appears.

4Select the field at the top, press E, and then set IP Setting to Enter manually Repeat the entry process for each field in the IP Address.

"" Setting IP Setting to Enter manually automatically changes DNS Setting to Enter manually.

5When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts.

6When the connection has been verified, the “Success! Your device is connected to the

Internet. If you have any problems using online services, please contact your Internet service provider.” message appears.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents WM55H Table of contents Specifications Before Using the Product Safety PrecautionsElectricity and safety StorageInstallation Insert the power plug all the way in so it is not looseOperation Use the product at the recommended resolution and frequency Store small accessories out of the reach of childrenDo not drop objects on the product or apply impact Do not use humidifiers or stoves around the productPrecautions for Use Cleaning the exterior and displayPreparations Checking the ComponentsPower button PartsParts Description Pen holderDetects users motions to turn the product on or off Motion sensorPorts Ports DescriptionBefore Installing the Product Installation Guide Installation on a Perpendicular WallInstallation on an Indented Wall RotationInstalling the Wall Mount Installing the Wall MountWall Mount Kit Specifications Vesa Standard Screw Quantity InchesNetwork Settings Wired Connecting to a networkConnecting to a Wired Network Automatic Open Network Settings Wired Manual Open Network Settings WiredHow to set up automatically How to set up manuallyConnecting to a Wireless Network Network Settings WirelessAutomatic Network Setup Wireless Manual Network Setup Wireless How to set up using Use WPS Use WPSWhats a Roll? WritingPortrait orientation Screen Elements Buttons DescriptionImport ExportDrawing / Erasing Changing pen thicknessChanging the pen color ErasingManaging Rolls Deleting / Exporting rolls Opening rolls→ Open Number ViewerFocus Icons Description Mirroring functionConnecting to a Mobile Device Import → MobileConnecting to a Laptop Connecting using a cableConnecting via the WiFi Display function Import → LaptopImporting from a USB Device Importing from a Network DriveImport → USB Import → Network DriveDevice name Source WindowMenu bar Export Sending Email Export → EmailSubject SendInstalling Flip Printing Software Setting up the printerSetting up automatically Setting up manuallyAccessible Printer Color ModeExport → Print CopiesExporting to a USB Device Exporting from a Network DriveExport → USB Export → Network DrivePen Menu2nd 3rd Description Connect Access Notification Network DriveAdd Account Edit AccountSystem DSTAdvanced Settings Auto Save & Auto Power OffStart Setup USB LockPicture Software Update Update NowReset All SupportProblems and Solutions Troubleshooting GuideSource window Hdmi issue White does not really look white Product will turn off automaticallyScreen display does not look normal Brightness and color do not look normalSound issue Touch function issues Icons can be touched but the drawings cannotIs open Use two pens, but they do not work wellOther issue There is no sound in Hdmi modeProduct smells like plastic DVI-HDMI cable is connectedGeneral SpecificationsModel Name Plug-and-Play Preset Timing Modes Page Responsibility for the Pay Service Cost to Customers Product damage caused by customers faultAppendix Not a product defectPrevention of Afterimage Burn-in What is afterimage burn-in?Recommended prevention practices
Related manuals
Manual 53 pages 12.84 Kb Manual 2 pages 32.83 Kb Manual 53 pages 60.29 Kb Manual 53 pages 22.24 Kb Manual 53 pages 39.29 Kb Manual 53 pages 23.19 Kb Manual 53 pages 27.12 Kb Manual 53 pages 25.23 Kb Manual 53 pages 2.31 Kb Manual 53 pages 3.03 Kb Manual 53 pages 33.69 Kb Manual 2 pages 16.71 Kb Manual 2 pages 29.32 Kb
Top Page Image Contents