Figure 15. Removing the Battery Pack
4.Grasp the tab on the battery and pull the battery out of the compartment. See ”Installing the Battery” for information on installing the battery.
Installing the Battery
To install the battery pack:
1.With the computer’s power off, close the LCD panel and turn the computer over so the bottom of the unit faces up.
2.Slide the battery compartment cover straight up and off the computer(Figure 16).
Insert the battery into the battery compartment, ensuring the correct orientation so that the battery fits in its slot properly.
3.Slide the battery pack into the compartment. Make sure the battery is fully inserted into the compartment.
4.Align the tabs on the battery compartment cover with the slots on the battery compartment.
5.Push the cover straight down until it snaps into place.
34 Using the Battery