Samsung N640CP4008/SEF, N640CP4007/SEF, N640CP4024/EHQ, N640CP2006/SEF Important Safety Instruction

Page 113

Important Safety Instruction

Read all of these instructions, and save these instructions for later use.

•Follow all warnings and instructions marked on the product.

•Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

•Do not use this product near water. Never spill liquid of any kind on the product.

•Do not place this product on an unstable cart, stand, or table.

•Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

•Before connecting this product to a power source, check the required voltage and frequency match the available power source.

•This computer is powered by an internal battery pack or by an external AC power source, Which is supplied with the computer. Use of another battery pack or AC power source may present risk of fire or explosion.

•This product is equipped with a 2-wire type plug. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.

•Do not allow anything to rest on the power cord.

•Do not place this product in a location where someone may trip over the cord.

•If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.

•Never push objects of any kind into this product through the cabinet slots, as they may touch dangerous voltage points or short out parts; that could result in a risk of fire or electric shock.

•Except as explained elsewhere in this manual, do not attempt to service this product yourself.

•Handle batteries, CD-ROM, hard drives and any drives with care. If dropped, they may damaged.

•Do not allow the battery to be exposed to direct sunlight for extended periods of time.

•Do not attempt to disassemble the battery. If the battery is disassembled and the electrodes are exposed to outside, the battery may generate eat and smoke by chemical reaction.

•Do not expose the battery to moisture or chemicals.

•Charge the battery only as described in this document.

•Do not short circuit the battery terminals as the resulting high currents can damage the battery.

ii

Page 112 Page 114
Image 113
Page 112 Page 114
Contents Special Features of the User’s Manual Using Your DocumentationUsing the Software User Documentation LCD Introducing Your ComputerBack View of Computer Attaching the AC Adapter Using Your Computer for the First TimeTurning On the Computer Turning On the Computer’s PowerAPMAdvanced Power Management mode Adjusting the LCD DisplayUnderstanding Post Turning Off Your ComputerRestarting Your Computer ACPIAdvanced Configuration and Power Interface modeTips for Using Your Computer Traveling with Your Computer Storing the Computer for Long Periods Handling SpillsKeyboard Using the KeyboardNumeric Keypad Using the Embeded Numeric KeypadFn Key Function Combination Using Special Function KeysDescription of Special Function Keys Using the Keyboard Mouse Action How To Using the TouchpadUsing the Touchpad Using the Touchpad System Status Lights Reading the System Status LightsReading the System Status Lights Peripheral Connectors Connecting Peripheral DevicesIconConnector Connecting Peripheral DevicesConnecting Peripheral Devices Setting the IDE type Using the Flex-BayDrive Switch To remove a device from the Flex-BayRemoving a Device from the Flex-Bay To install a device in the Flex-BayMagnetic fields can destroy the information on a disk Using the Floppy DriveUsing the Floppy Drive Using the CD-ROM Drive Using the CD-ROM DriveUsing the CD-ROM Drive Installing the Power DVD Player MPEG-2 Software Using the DVD-ROM DriveRemoving the Hard Drive Using the Hard DriveRemoving the Hard Drive Installing a Hard DriveCharging the Battery Using the BatteryRemoving the Battery Safely Using the BatteryRemoving the Battery Pack Installing the BatteryUsing the Battery Gauge Monitoring the Battery ChargeSet options under Battery Status and Alarm Settings Using PowerProfiler to Monitor the BatteryCondition Action to Take Battery WarningsBattery Warnings Sens Modem Naming Convention Using the ModemIf you use a Windows Communication Program Precautions before useIf you use a simple terminal program Description of 56K SpecificationInstall the Modem Driver Installing the Modem Driver in Windows MeDeleting the Modem Driver Confirming Installation of the Modem DriverSelecting a Country Installing the Modem Driver in Windows 95/98 Check if Country is selected correctly What are AT commands? Modem CommandsBefore Using AT Commands Command modeDisplay the result value Using AT commandsUsing Command Mode during Communications ATO Basic AT CommandsATS0? Starting System Setup Using System SetupSystem Setup Menus Menu FunctionNavigation Alternate Function Key System Setup Navigation KeysMain Menu Using System Setup Using System Setup Advanced Menu Security Menu Power Menu Using System Setup Exit Menu Boot MenuUsing System Setup Creating a Password Using System SecuritySystem Passwords Deleting a Password Locking the Keyboard Requiring a Boot PasswordLocking the Hard Drive Boot Sector Maximum Power Saving Mode Using Power Management OptionsRest Mode Standby ModeRest Mode Precautions Using PowerProfiler To create Fdisk Creating a Save to Disk PartitionTo create Phdisk Insert the System Recovery CD-ROM To reinstall your operating systemTo reinstall your original applications and drivers Resolution and Color Depth Video Features and ConfigurationVideo Driver Capabilities Configuring Display FeaturesSelecting a Monitor Type Changing Color Depth and Resolution Changing the Video Driver Using the TV-Out PortClick OK and follow the prompts that appear on the screen Setting Dual View mode Using Dual View modeLimits and cautions of using Dual View mode Primary Limits Secondary Using several display devicesTwo Displays Three DisplaysLimits on Video Driver while using Dual View mode Maintaining PC Cards Working with PC CardsWindows 98/ Me Using PC CardsWindows NT Working with PC Cards AC Adapter Using OptionsBattery Pack Memory Modules Auto AdapterInstalling a Memory Module Before You Install MemoryRemoving the Memory Module Compartment Door Hard Drives Installing a Memory ModuleCD-ROM Drive Setting the switch on 2nd HDDSuperdisk LS-120 Drive DVD-ROM Drive ModuleZIP Drive Inserting a 120MB LS-120 diskette into the LS-120 drive Docking OptionsDrivers About Drivers and System ResourcesIRQs IRQsService Pack 4 for Windows NT About Drivers and System Resources Operating Problem TroubleshootingComputer does nothing when you turn it on Computer is not behaving as expectedPC Card does not work correctly Battery power seems to run out faster than expectedWhen using a PBX phone system I cant dial on my modem Infrared ProblemsModem Problems Troubleshooting Hardware Specifications SpecificationsDimension EnvironmentExternal AC Adapter Lithium-Ion Smart BatteryNi-MH Dumb Battery CD-ROM AbbreviationsPcmcia Volt Universal serial busVoltage alternating current Voltage collector currentBoot disk BootGlossary AC adapterCache memory DMA direct memory accessCardBus Cmos memoryHard drive Floppy diskAddress IRQ interrupt request lineMBmegabyte RAM random access memoryMegabit Operating systemRefresh rate ResolutionROM read-only memory SectorDiskette a Recording the Computer Hardware ConfigurationDisabled 42F8, IRQ 2E8, IRQ 3 Disabled Parallel port Enabled Mode Output onlyDisabled Bi-directional Disabled OtherSecurity Menu Page Important Safety Instruction Iii Federal Communications Commission FCC Federal Communications Commission FCC Part 68 Statement Canadian Radio Interference Regulations CTR21 StatementClass 1 Laser Productlaserschutzklasse 1 Produkt Country-Specific Power cord Set Requirements Power Cord RequirementGeneral Requirements Country Accredited Applicable AgencySEV
Related manuals
Manual 138 pages 1.75 Kb
Top Page Image Contents