Using Dual View mode
Single View mode is used to be the basic display method until now which displays same view on all the display devices connected to a system. While Dual View mode is the ’Extended screen mode’ supported in Windows 98/Me, which displays separate views on each display devices connected to a system.
The default setting on your system is Single View mode.
Setting Dual View mode
To set Dual View mode on your system;
1.Connect peripheral display device such as monitor, TV to your system and start the system.
2.Select Start > Settings > Control panel > Display and start Display properties.
3.Click Settings tab.
4.Click the second monitor among two monitor pictures.
5.When ~ Do you want to enable this monitor?message appears, then select Yes.
6.Click Apply or OK.
To confirm whether the system is set properly with Dual View mode;
1.Open Display properties and click Settings tab
2.Place the mouse pointer on the first monitor picture and click over a second, then digit number 1 will be shown on the first actual monitor screen. And place the mouse pointer on the second monitor picture and click over a second, then digit number 2 will be shown on the second actual monitor screen.
3.The monitor displays digit number 1 is the primary monitor and number 2 is the secondary monitor.
When you start Windows explorer, then the program displays on the primary monitor, if you can drag it to secondary monitor, then Dual View mode is now working properly.
76 Using Dual View mode