wireless network connection
and configuration (HMX-S15/S16 only)
MANUAL NETWORK CONNECTION
By typing in the IP address, you can connect to a network via an AP (access point) in the wireless network service area.
PRECHECK!
Select the record ( 
/ 
) mode by pressing the MODE button. page 27
1.Touch the Network (
) “Settings” “Access Point Setting”
the desired AP’s icon ( 
) “IP Setting” “Manual.”
•The IP setup screen appears.
•If you select a WPS AP, touch the WPS PIN tab on the bottom of the LCD screen, and then enter the generated PIN number in the AP device within 2 minutes.
2.Touch each item and enter the required value by using the virtual keyboard.
Submenu items
"DDFTT1PJOU4FUUJOH |
| |
OFF | .*/ | |
4BNTVOH0VUEPPS |
|
|
4BNTVOH"#$ |
|
|
WPS |
|
|
| WPS PBC |
|
"DDFTT1PJOU4FUUJOH | "VUP | OFF | |
.*/ | |||
"VUIFOUJDBUJPO | .BOVBM | 81"14, |
|
%BUB&ODSZQUJPO |
| 5,*1 |
|
/FUXPSL,FZ |
| ⧕ᱽ |
|
*14FUUJOH |
| ᯱ࠺ |
|
|
| OK | |
•IP: Provide the IP address.
•Subnet Mask: Provide the subnet mask.
•Gateway: Provide the gateway.
•DNS Server: Provide the DNS address.
3.When done, touch the ( OK ) tab.
• The camcorder connects to the network via the selected AP.
"DDFTT1PJOU4FUUJOH
*1
4VCOFU.BTL
(BUFXBZ %/44FSWFS
/FUXPSL4FUUJOH
"DDFTT1PJOU4FUUJOH %FWJDF*OGPSNBUJPO
OFF | |
.*/ |
OK
.*/
• For more information about the network settings, contact the network administrator or the service provider.
•The network settings may differ, depending on network conditions.
•Do not try to connect to a network that you have no permission to access.
114• Use a fully charged battery while you are using network services.