Samsung HMX-S10BN/XAA, HMX-S15BN/XAA manual Wireless Network, 141

Wireless Network

Message	Icon	Informs that...	Action
		• WPS PBC button was
		not pressed within 2
Connection failed. Time		minutes, or WPS PIN	• Try again and press WPS button
	-	was not entered to AP.
			or enter the WPS PIN within 2
expire.		• Failed to connect to
			minutes.
		the Sender in Device to
		Device mode within 2
		minutes.
		Camcorder’s WLAN	• Configure the IP settings (auto
Connection failed.	-	configuration does not	or manual) of your camcorder to
		match to that of AP.	match the AP’s.
Initializing failed.	-	Failed to initialize DLNA	• Reset DLNA devices and try
		devices.	again.
		No renderer that can	• Use Refresh button to search for
No devices found.	-	be connected to the
			the renderer.
		camcorder is found in the
			• Check your network connection.
		connected network.
		No available AP is	• Check whether an AP is available
			near you.
No Wi-Fi AP found.	-	found around you or the
			• If an available AP does exist and
		camcorder’s WLAN is not
			the problem persists, contact
		functioning properly.
			Samsung Service Center.
		Device on the other end	• Check if recipient’s device is
			turned on.
File reception failed.	-	is turned off or network
			• Check if network connection
		connection has problem.
			works properly and try again.
		In Device to Device mode,	• Correctly enter the password
Invalid password.	-	the Receiver’s and Sender’	sent by Sender in Receiver
		s password do not match.	screen.

141