troubleshooting
PROBLEM | SOLUTION | |
|
| |
Motor does not start | • Check cable, pulg and socket. | |
• Leave to cool. | ||
| ||
|
| |
Suction force is gradually | • Check for blockage and remove. | |
decreasing | ||
| ||
|
| |
Cord does not rewind fully | • Pull the cord out | |
|
| |
Vacuum cleaner does | • Check hose and replace if required. | |
not pick up dirt | ||
| ||
|
| |
Low or decreasing suction | • Please check filter and, if required, clean as illustrated in the | |
instructions. if filters are out of condition change them to new ones. | ||
|
Body overheating
• Please check filters, If required clean as illustrated in the instruction.
Static electicity discharge
• Please decrease power suction.
This Vacuum cleaner is approved the following. EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
16_ troubleshooting