SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24- hour or
•When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
Auto energy saving function
If you do not select any function when appliance is in the middle of setting or operating with temporary stop condition, function is canceled and clock will be displayed after 25 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
1.To display the time in the...
Press the Clock (
) button once or twice.
2.Set the hour with the h button and the minutes with
the min button.
3.When the right time is displayed, press the Clock (
) button again to start the clock.
Result : The time is displayed whenever you are not using the microwave oven.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
Always check your cooking settings before leaving the oven unattended. First, place the food in the centre of the turntable. Then, close the door.
1.Press the Power Level ( 
) button.
Result : | The 750 W (maximum cooking power) | |
| indications are displayed. | |
| Select the appropriate power level |
|
|
| |
| by pressing the Power Level ( ) button again until the | |
| corresponding wattage is displayed. Refer to the power | |
| level table on the next page. | |
2.Set the cooking time by pressing the 10 min, 1 min
and 10 s button.
3.Press the Start ( 
) button.
Result : The oven light comes on and the turntable starts rotating.
1) Cooking starts and when it has finished the oven beeps four times.
2)The end reminder signal will beep 3 times (once every minute).
3)The current time is displayed again.
Never switch the microwave oven on when it is empty.
15
ENGLISH
3/11/2015 1:07:46 PM