Maximum power limit function
This function allows you to adjust the maximum power of the unit.
1.Keep the power off.
2. Touch the Lock control 
sensor (for approximately 3 seconds) to turn on the child safety lock.
3.Touch the Complete Timer Control 
for approximately 3 seconds.
4.Touch the Timer Control 
sensor for
approximately 3 seconds.
5.When your control panel looks like
the picture on the right side, you can adjust the power using the Heat setting selectors. (3000 W, 4000 W, 7200 W)
6.Touch the On/Off control 
sensor to
end the setting.
NOTE
In 3000W
Using the touch control sensors
To operate the touch control sensors, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If your finger is too flat on the panel, an adjacent sensor may be actuated as well.
Switching the appliance on
The appliance is switched on using the On/ Off control 
sensor.
Touch the On/Off control 
sensor for approximately 1~2 seconds.
The digital displays will show 
.
NOTE
After the On/Off control 
sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 20 seconds. Otherwise, the appliance will switch itself off for safety reasons.
English 17
Hob use
5/24/2016 4:23:51 PM