Manuals / Ricoh / Computer Equipment / All in One Printer

Ricoh 1008, FT1208 Firmly insert the plug into the copier and outlet, Turn the main switch on

Models: FT1208 1008

1 65

Download 65 pages 33.01 Kb

Page 19

Power Connection

Power Connection

Only connect the copier to the power source described on the inside front cover of this manual. Avoid multi-wiring as it could cause an electric shock or fire.

Avoid using an extension cord. Make sure the wall outlet is near the copier and freely accessible so it can be unplugged easily in the event of an emergency.

•Make sure the plug is firmly inserted in the outlet.

•Voltage must not fluctuate more than 10%.

•Do not set anything on the power cord.

•Always turn the copier off when you have finished copying for the day.

..........................i

Firmly insert the plug into the copier and outlet.

Turning Copier On

Turn the main switch on.

Wait for the copier to warm up. During warm-up, the Start indica- tor lights red.

When the Start indicator turns green, the copier is ready to make copies.

•If Load Paper “PE ” indication is on when starting, load paper.

Image 19

Ricoh 1008 Firmly insert the plug into the copier and outlet, Turn the main switch on, Power Connection, Turning Copier On

Contents

RICOH FT1008/1208 For safety. please follow the instructions in this manualOPERATOR’S MANUAL For details, see pages ESSENTIAL SYMBOLS 8 Avoid using an extension Page 5. Paper Cassette 1. Main Switch2 . Exposure Glass 4 . Operation Panel6 . Guide Plates 3. Fusing Unit4. Image Density Recalibration Switch 2 . Toner CassetteQpe1&2 @ Preset Reduce/Enlarge Key NOTES ON INSTALLATION LOCATION 20-21Auto-off mode - for automatically saving power Auto Start - Setting Copy Orders During Warm-UpCLEARING MISFEEDS 36-3737-40 MAINTAININGUnpacking INSTALLATIONInstalling Copier 14-19Page Page Remove the toner cassette from the vinyl bag Remove the end plate @ and set it to your desired paper size Page Confirm that the copy tray is securely in place When you copy onto long-size paper, extend-the copy tray as shownTurning Copier On Turn the main switch onPower Connection Firmly insert the plug into the copier and outletAuto-off mode - for automatically saving power Copier Location Reducing/Enlarging Using Preset Ratios ADJUSTING COPY DENSITYAuto Start - Setting Copy Orders PLACEMENT OF ORIGINALSAlignment of Originals 0++ +o Auto Start - Setting Copy Orders During Warm-Up1,z 3 , . . . . . . . . . . . . . . . . . . . . 48,49,50 One sheet should be inserted into the bypass feed at a time Transparencies copies are as followsSet the originals and transparencies as shown Set the originals and letterhead as shownPage Page Page Press the Start key to make the first copy Page Page Close the top unit by pressing down firmly on the marked posi GD tion See page Adjustable itemAuto reset duration User ToolPage 1. Auto image density levelUser mode Adjusting values/modesNumber 90 minutes 10 minutes30 minutes 60 minutesDefault 1 minute Number For the second two digits, the center image density indicator is lit Paper MAINTAINING THE COPIER44-47 45-46Open the top unit Remove the used toner cassette carefully Page C o p y Tray Platen CoverBypass Feed Page Keep this tool inside the copier Remove the tool from the transfer corona wire and store it as shownm @B Close the top unit by pressing down firmly on the marked posi- tionAttension Make sure to press the marked position Close the top unit by pressing down firmly on the marked posi- tionUnder the following conditions, you might get light copies When you make 150 or more copies continuouslyWhen you make solid full image copies Always turn the copier off when you have finished copying for the dayDo not leave any tom scraps of paper inside the copier Do not lay heavy objects on the toner cassette Never store toner cassette where it will be exposed to heatUse older stock first Do not lay heavy objects on paper Store horizontally in a cool, dark placePage Put the toner cassette in a vinyl bag Insert the toner cassette, copy tray operator’s manual and power cord into the boxam Seal the box firmly using tape Put the copier in the cardboard boxCLEARING MISFEEDS TROUBLESHOOTINGWhen Pz appears on the copy counter When & stays onPage ConditionCause RemedySet proper paper. Paper ConditionCause RemedyPage When PE appears on the copy counter Make sure that the Check Paper Path & indicator is turned off When & is lit62-63 SPECIFICATIONSConfiguration Weight Paper Capacity Toner Replenishment Copy Tray Capacity Power SourcePower Consumption Noise Emission DimensionsPage Page 0 means POWER OFF I means POWER ON.1Declaration of Conformity The Netherlands EE@rnm~n Overseas Affiliates U.S.A