Pull the paper cassette out. Check the set paper size.
If preset paper size is the setting you want to use, disregard steps @ to
If you need to change the paper size, continue to the following steps.
Adjusting the paper length
Remove the end plate @ and set it to your desired paper size 0.
Adjusting the paper width
Push the bottom plate halfway down 0, and carefully remove the two side guides by pushing @ and lifting @ the end of the side guides as illustrated.
Move the two side guides to your desired paper size, while pushing the bottom plate halfway down.
To set the side guides, confirm that the metal hook of the side guide is above the protrusion of the bottom plate 0, push the bottom plate halfway down 0, and insert the bottom hook of the side guide into the hole 0.
Then slowly insert the hook on the other end into the hole until it clicks into place.
17
