.
Only connect the copier to the power source described on the inside front cover of this manual. Avoid multi- wiring as it could cause an electrical shock or fire.
8Avoid using an extension
Power cord. Make sure the wall Connection outlet is near the copier and Warning freely accessible so that in
event of an emergency it can be unplugged easily.
Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more
Power Cord than necessary. These Warning actions could cause an
electric shock or fire
Do not remove any covers or screws other than those specified in this manual.
Some parts of the copier are charged with high voltage and could give you an electric shock. When the copier needs to be checked,
@adjusted or repaired,
Modification contact your service Warning representative.
Do not take apart or attempt any modifications to this copier. There is a risk of fire, electric shock, explosion or loss of sight.
If the copier looks damaged or breaks down, smoke is coming out, there is a strange smell or anything looks unusual, immediately turn off the main switch
then unplug the power cord Damage from the wall. Do not Warning continue using the copier in
this condition. Contact your
service representative.
/
Do not put any containers holding metal objects or water (e.g. vases, flower- pots, glasses) on the copier.
If the contents fall inside 3ectrical Shock the copier a fire or electric
Warning shock could occur.
.
Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame. Dispose of the used toner
Toner containers according to Warning local regulations.
/
,
If anv metal, liauid or foreign matter falls into the copier, turn off the main switch and unplug the main
power cord. Contact your Foreign service representative. Do
Object not continue using the Warning copier with a fault or defect.
Do not plug or unplug the power cord with wet hands or an electric shock might occur.
