Adjusting values/modes
When the desired user tool number is lit on the copy counter and the Photo Mode indicator is blinking, enter the required setting using the + and - keys.
• For the settings, refer to pages
Press the Image Density adjust- ment key.
The setting will be stored in memory.
• The setting number and the Photo Mode indicator blink. Now, you can access another user tool number by pressing the + and - keys.
To exit user tools, turn the main switch off and then back on again.
1. Auto image density levelUser mode 1
If the image density in the auto image density mode is too dark or too light, adjust it using this function.
Default: Normal (Number: 0)
Setting Normal Light Lighter Lightest Dark Darker Darkest | |||||||
Number | 0 | 1 | 3 | 5 | 2 | 4 | 6 |
•If your desired image density could not be obtained with the adjustment in “User mode l”, adjust it by sliding the image density recalibration switch to the right. (Refer to page 34.)
37
