Ricoh FT1208, 1008 manual Qpe1&2

Qpe1&2

1.Photo Mode Indicator			4.Copy Counter
	2.Auto Image Density			5.Start Indicator
		Indicator		6.Start
		Toner Indicator			Key

Indicators

0 Clear/Stop Key

Path Indicator

8.Image Density Adjustment Key

1.Photo Mode Indicator: Lights up when photo mode is selected with image density indicator.

(See page 28.)

2.Auto Image Density Indica- tor: Lights up to show copier is in automatic image density mode. (See page 28.)

3 . &I Replenish Toner Indicator: Replenish toner when this indica- tor lights up. (See page 42.)

4 . Copy Counter: Indicates the number of copies.

Shows reduction/enlargement size in % in zooming mode (Type 2 panel only); PE display tells you to replenish paper, and displays other data.

5.Start Indicator: Lights green when copier is ready to make copies.

6.Start Key: Press to start copy- ing.

7.Manual Image Density Indi- cators: Lights up when image density is adjusted manually. (See page 28.)

8.Image Density Adjustment Key: Used to adjust image density. (See page 28.)

9 . & Check Paper Path Indica- tor: Lights up to indicate paper jam. To clear paper misfeeds, see page 60.

10.+ and - keys: Used to increase or reduce the desired number of copies. Or type 2 only, for reduction or enlargement in 1% increments. (See page 30.)

11.Clear/Stop Key: Press to reset the counter to 1. During copy- ing, press to stop copying.

8