1 . Charge Corona Wire If white streaks appear on copies, or image density ap- pears uneven, clean this wire. (See page 45.)

2 . Toner Cassette

When l&l lights up or blinks, replace the toner cassette. (See page 42.)

3.Fusing Unit

Fuses the copy image to the paper.

B : This unit may be very hot. When accessing the inside of the copier, use caution.

4.Image Density Recalibration Switch

When you want to adjust the image density after using the copier for a long time, adjust

this switch. (See page 34.) 5 . Transfer Corona Wire

If white streaks appear on copies, or image density ap- pears uneven, clean this wire. (See page 45.)

6 . Guide Plates

If the reverse side of copies appears dirty, clean the guide plates. (See page 47.)

7

Page 7
Image 7
Ricoh 1008, FT1208 manual Guide Plates