3.The burner display will be changed
Touch again to turn off the burner.
Power boost control
The Power Boost 
function makes additional power available to the each cooking zones. (example : bring a large volume of water to the boil)
Cooking zones | Max Boost time |
|
|
145 mm | 10 min |
|
|
210 mm | 10 min |
|
|
Front or Rear Flex Plus | 10 min |
|
|
Complete Flex Plus | 5 min |
|
|
After these times, the cooking zones automatically return to power level 
.
NOTE
In certain circumstances, the Power boost function may be deactivated automatically to protect the internal electronic components of the hob.
For example, It is impossible to output max power on Flex zone rear and Flex zone front at the same time.
Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost 
function, Power Management automatically reduced the heat setting of cooking zone.
•No.1 and No.2 is paired
•No.3 and No.4 is paired
|
| 3 | The indicator for this cooking zone | ||
1 | |||||
|
|
|
| alternates for some seconds between the set | |
|
|
|
| ||
|
|
|
| heat setting and the maximum possible heat | |
2 | 4 | setting. After then, the indicator changes | |||
from the set heat setting to maximum | |||||
|
|
|
| ||
possible heat setting.
Pause
The Pause 
function simultaneously switches all cooking zones that are switched on to the low power setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.
When the Pause 
function is activated, all touch sensors except for the Pause 
, Lock 
and the On/Off control 
sensors are disabled. To resume cooking,
touch the Pause 
sensor again.
| Control Panel | Display |
|
|
|
To Switch On | Touch Pause |
|
|
|
|
To Switch Off | Touch Pause | Return to previous power level |
|
|
|
English 21
Hob use
5/24/2016 4:23:53 PM