REMOVING THE REFRIGERATOR DOORS
If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.
2.Disconnect two connectors ( 3 ) at each side of the top cap and the one connector ( 4 ) on left side door. Remove the tube ( 5 ) with pressing the dark gray color part ( 6 ) of the water line coupler.
4
Disconnect power to the refrigerator before WARNING removing the door or drawer.
5
3
•Be careful not to drop, damage or scratch the door/drawer while removing them.
•Be careful not to get injured while removing the door/drawer.
•Reattach the door/drawer properly to avoid:
-Moisture from air leakage.
-Uneven door alignment.
-Wasting energy due to improper door seal.
6
3.Remove the 3 hex head bolts ( 7 ) attached to the upper left and right door hinges with a socket wrench (10mm). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver(+). Remove the upper left and right door hinges ( 9 ).
Socket wrench
Tools you will need (Not provided) | 7 | 8 |
|
Philips | Socket wrench | |
screwdriver (+) | screwdriver | (10 mm) |
|
| 4. |
Pliers | Allen wrench |
|
| (3/16”) (5 mm) |
|
9
Lift the door straight up to remove.
Disassemble the Refrigerator doors
1.With the door opened, remove the Hinge Cover cap ( 1 ) with a Flat head screwdriver, and close the door. Remove the 3 screws holding down the Hinge Cover and remove the Hinge Cover ( 2 ) .
2
1
5.Remove the screw ( 10 ) attached to the lower left and right door hinges with a philips screwdriver(+). Remove the 2 hex head bolts ( 11 ) attached to the lower left and right door hinges with an allen wrench (3/16”). Remove the lower left and right door hinges ( 12 ).
12
10
11
Allen wrench 
08_ setting up
2016. 12. 2. �� 4:33 |