2. Tempered Glass shelves
To remove - Tilt up the front of the shelf in the direction shown (1) and lift it up vertically (2). Pull the shelf out.
To relocate - Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks can drop into the slots.
The Tempered Glass shelves are heavy. Use CAUTION special care when removing them.
Zone – Open the Flex door to full extension. Tilt the front of the Flex Zone up, place the back of the Flex Zone onto the rails, and then lower the front until the whole Zone rests on the rails.
When the Flex Zone or LED lighting are not working, check the connectors [ ( 1 ), ( 2 ) shown below] for cracks or leaks.
| 1 |
2 | 2 |
|
3. Vegetable & Fruit Drawers
• After pulling out completely the vegetable pan, take it out by lifting up the front and pull it forward.
• To remove the shelf of the vegetable pan, press the button on the left side of the shelf while you are lifting it. Pull it out slowly.
Rounded up while pressing |
the button |
Button
Reassemble in the
CAUTION inverse order of the disassembly.
The assembly is completed when you hear a “Click”.
4. Flex Zone
To remove the Flex Zone
–Pull the Flex door out to full extension. Lift the Flex Zone up, pulling it to your body with both hands.
To relocate the Flex
18_ operating
1
1.Refer to page 9 for disassembly instructions.
2.Open the cover housing with a
USING THE TILTING POCKET
The Tilting Pocket can be used to store up to a 406mm pizza if you place it as shown in the illustration.
2016. 12. 2. �� 4:33 |