Samsung RF260BEAESL/TA manual Disassemble the Flex Door, Assemble the Freezer Drawer

5.Remove the screw ( 6 ) attached to the lower left and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 7 ) attached to the lower left and right door hinges with an allen wrench 5 mm. Remove the lower left and right door hinges ( 8 ).

8

6

7

Allen wrench

DISASSEMBLE THE FLEX DOOR

1.Take out the upper drawer by lifting it up.

2.Take out the lower basket ( 1 ) by lifting the basket up from the rail system.

1

3.Press the fi xing hook of rail system.

4.After holding and pulling out the top of Freezer Door, remove it at the rail system.

Make sure there is no scratch at the end of CAUTION Sliding Rail by being dented from the fl oor.

Make sure that you mount the freezer CAUTION basket in the right position when removing

/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
Do not overload the bottom basket or
the top drawer. Overloading prevents the	01
Freezer drawer from closing properly and
	SETTINGUP
will eventually cause frost build-up.

ASSEMBLE THE FREEZER DRAWER

To reattach the drawer after you have moved the fridge to its fi nal location, assemble parts in reverse order.

setting up _11

DA68-02616D(0.0).indb 11 2012.6.14 10:52:48 AM