Samsung RF260BEAESL/TA Using the Cold Water Dispenser, To prevent the water from Splashing out

USING THE COLD WATER DISPENSER

Using the Water dispenser (RF261B)

Place a glass underneath the
water outlet and push gently
against the water dispenser lever
with your glass. Make sure the
glass is in line with the dispenser	PUSH
to prevent the water from
splashing out.

If you have just installed the refrigerator or installed a new water fi lter, Flush 11 L through fi lter before use (fl ush approximately 6 minutes).

Make sure water fl ows cleanly before drinking.

If you have a long vacation or business trip, CAUTION close the water valve and shut off the water

supply to the Refrigerator. This will help prevent accidental leakages.

Water clouding phenomenon

All water provided to refrigerators fl ows through the core fi lter which is an alkaline water fi lter. In this process, the pressure in the water that has fl owed out of the fi lter gets increased, and oxygen and nitrogen become saturated. When this water fl ows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

The water tank’s capacity is approximately 1 L. Please wait 1 second before removing the cup after dispensing water to prevent spills.

18_ operating

DA68-02616D(0.0).indb 18 2012.6.14 10:53:9 AM