Samsung LH015ISFSAS/EN, LH025ILENAS/EN, SBB-IS08EL1/EN manual System

System

Main menu	Sub menu	Settings	Description
System	Setup		Go through the initial setup steps like you did the first time you used this product.
			――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
			If you want to change the PIN number, use the Change PIN function.
	Time	Clock Set	Select Clock Set. Select Date or Time, and then press E.
			Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and
			right arrow buttons to move from one entry field to the next. Press Ewhen done.
			――You can set the Date and Time directly by pressing the number buttons on the remote control.
		DST	Switches the DST (Daylight Saving Time) function on or off.
			――Start Date, End Date and Time Offset are enabled only when DST is set to Manual.
		Sleep Timer	Automatically shuts off the product after a preset period of time.
			――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer,
			select Off.
	Auto Source Switching	Auto Source Switching	When the Auto Source Switching is On, the display video source will automatically be searched for
			active video.
			The Primary Source selection will be activated, if the current video source is not recognised.
			Secondary Source selection will become active, if no primary video source is available.
			If both the primary and secondary input sources are not recognised, the display will perform two
			searches for an active source, each search checking the primary and then secondary source. If both
			searches fail, the display will return to the first video source and display a message indicating that
			there is no signal.
			When the Primary Source selection is set to All, the display will search all the video source inputs twice
			in sequence looking for an active video source, returning back to the first video source in the sequence
			if no video is found.
		Primary Source Recovery	Select whether to restore the selected primary input source when a primary input source is connected.
			――The Primary Source Recovery function is disabled if Primary Source is set to All.

68