Samsung SCC-643P manual

Page 3

6.Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.)

7.Do not install the unit in humid, dusty, or sooty locations. (Doing so may cause fire or electrical shock.)

8.If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. (Continued use in such a condition may cause fire or electrical shock.)

9.If this product fails to operate normally, contact the store of purchase or your nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.)

10.When cleaning, do not spray water directly onto parts of the product. (Doing so may cause fire or electrical shock.)

Wipe the surface with a dry cloth. Never use detergents or chemical cleaners on the product, as this may result in discoloration of surface or cause damage to the finish.

Caution

1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature (over 122°F), low temperature (below 14°F), or high humidity.

(Doing so may cause fire or electrical shock.)

3.Avoid a location which is exposed to direct sunlight, or near heat sources such as heaters or radiators.

(Neglecting to do so may result in a risk of fire.)

4.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

5.Install in a well-ventilated location.

6.Remove the power plug from the outlet when there is a lightning storm. (Neglecting to do so may cause fire or damage to the product.)

Image 3
Contents SCC -643P Safety Precautions Page Before Usage Approval of Standards Table of contents Appendix Product specifications Chapter SCC-643 P Overvie w SCC-643P Introduction Locations of Control Back Adapter Connection Camera Address Setup Initial SettingSetting RS-422A/RS-485 termination Switch Setting 100 117 177 237 Chapter CC-643P Installatio n Before Installing Preparing the Cables Cable Connection Installing SCC-643P Indoor Housing SHG-120 Ceiling Mount Adaptor SADT-100CM Installing the Camera Assemble the COVER-DOME onto the Dome Setup Menu Overvie w Structure of the Setup Menu Alarm SET Alarm Priority SET Camera SET Menu Camera IDSync COLOR/BW Motion DET Zoom SpeedVideo SET Menu ExitIris BLC Submenu of the ALC menu ALCShutter ManuAGC Slow NormalFast White BAL White BAL Manu Special OFF Auto Focus Oneaf Zoom Exit Quit Special Zoom Auto FocusPreset 2 ALARM2, Preset 3 ALARM3, Preset PresetScan Preset IDPosition SET Video SETEND SET Auto ModeAuto PAN Start SETPattern DirectionEndless SpeedAlarm SET Alarm Priority SETAlarm in SET Alarm OUT Alarm PatternAUX OUT Control Home Position SET UP Time for Home ReturnOther SET Home ReturnPAN/TILT Privacy ZoneCAM Reset Product specifications SCC-643P
Related manuals
Manual 140 pages 9.3 Kb Manual 140 pages 45.73 Kb Manual 28 pages 59.12 Kb Manual 1 pages 9.37 Kb