If you press [ENTER] once more, you will exit the "AREA" setting menu.Use the "SENSITIVITY" menu to set the sensitivity of the MOTION Detection.The Higher it is set, the more sensitive the Motion Detection moves.
➜
Use the [Left, Right, Up, Down] Keys Press the [5] key to assign an area or to cancel the area.
*Motion Detection function does not operate while handling slow SHUTTER, PRESET,
SCAN, AUTO MODE(AUTO PAN, PATTERN) or MANUAL KEY (JOYSTICK, ZOOM, FOCUS, IRIS).
EXIT
The EXIT menu is used to quit the CAMERA SET menu of the
-QUIT: Ignores the changed information and restores the saved information.
-SAVE: Saves the information of the setting condition of the menu.
-PRESET: Ignores the changed information and restores the initial factory defaults of the menu.
|
| (CAMERA SET) |
|
| |
|
|
|
| ||
|
| CAMERA ID | OFF |
| |
|
| INT |
| ||
|
| COLOR/BW | AUTO... |
| |
|
| ZOOM SPEED | 3 |
| |
|
| MOTION DET | OFF |
| |
|
|
|
| QUIT |
|
|
| EXIT |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
2. VIDEO SET MENU
IRIS
The video output level of the monitor can be controlled by the IRIS lens depending on the level of the incoming light.The video output level can be set in the ALC menu.The opening and shutting of the Iris lens can be set manually in the MANU menu.